Abtus PWR-DA09C/P User's Operation Manual

SPECIFICATIONS
Technical PWR-DA09C/P (10Amp)
Max Current Rating: 10 Amp (2400 Watts at 240 VAC)
Input Voltage: 185 to 275 VAC without damage
Delay Intervals: Total elapsed ON delay time adjustable from 1-60 seconds,
with RS-232 for precise timing and sequence order.
ON Sequence: Respective relay goes ON base on programmed sequence/order and
delay time for each relay.
Remote Switch: Screw type terminal block,
LED, Switch and GND
Spike Protection Modes: Line to neutral, zero ground leakage
Spike Clamping Voltage: 188 Vpk @ 3,000 amps, (133 VAC RMS)
Response Time: 1 nanosecond
Maximum Surge Current: 6,500 amps
Relay Rating 30Amps @ 240VAC
Power Consumption 4.5 Watts (standby), 14 Watts (all relay ON)
Weight 3.6Kg
Over Voltage Shut Down 150V ±1% (Low), 275 ±1% (High)
Operational 220/240V
Mechanical
Housing Metal enclosure
Product
Dimensions (L x W x H) 430 x 204 x 44 mm
Weight 1.35Kg
Fixedness Standard 1-U rack-mount (*with "L" bracket)
Package include
1 x Switcher
1 x Power Cord
** For detail, updated Command Code and Application Software, please visit and download from www.abtussingapore.com
PWR-DA09C/PG (16Amp)
16 Amp (3840 Watts at 240 VAC)
1 x RS-232
1 x Quick User Guide
* Specifications are subject to changes without notice.
Typical Applications
Any professional audio
system in powering a rack
f u l l o f e q u i p m e n ts i n
sequence order with a timed
delays.
• Schools (Media Classroom)
• Churches
• Corporate Applications
(Meeting Room)
Sequenced Output
Power Conditioner
(8 Delay + 1 )
Model: PWR-DA09C/P & PWR-DA09C/PG
PRODUCT DESCRIPTION
The PWR-DA09C/P (10 amp) and PWR-DA09C/PG (16 amp) is a safe and convenient Sequenced
Output Power Conditioner distribution unit offering protection to all valuable rack-mounted equipments.
Sequenced power up of a complete power audio system from just a push of a switch, eliminating
the loud "POP"s which may damage speakers and other equipments connected.
The PWR-DA09C/P (10 amp) and PWR-DA09C/PG (16 amp) features sequenced power start up.
During start up, each outlet is turned on one at a time with a delay time (Variable and programmable)
between each other.
This delay prevents the "POPs" by allowing each piece of equipment to properly power up before
allowing the audio signals to pass through. The PWR-DA09C/P also features an EMI filter which
suppresses RF (radio frequency) and other AC line noises, ensuing a quieter operation of units
that's plugged in. The Line Voltage sensor monitors the incoming voltage from 185~265VAC,
assuring the AC voltage is in a safe operating range for the connected equipment. Its 12VDC
BNC outlet also allows power for a LED light/Lamp that provides a cool-running light source for
all the equipments in your rack.
ABtUS SINGAPORE PTE LTD
www.abtussingapore.com