Advertisement
Quick Links
WICKER DOLL BUGGY
Assembly Instructions. Adult Assembly
Required. Save these instructions for future
use. This item is a toy for dolls only.
For children ages (3) years and older.
PRODUCT MODEL
NUMBER:
00569
Actual product may vary slightly from shown.
Visit us online at www.badgerbasket.com
Toll-Free Customer Service: 1-800-236-1310 (Monday to Thursday 7:30 AM-4:30 PM CST)
Web: http://www.badgerbasket.com/parts • E-mail: parts1@badgerbasket.com
PLANT AND GENERAL OFFICE: PO Box 227, Edgar, WI 54426-0227 • Phone: 715-352-2311 • Fax: 715-352-3163
CORPORATE OFFICE: 111 Lions Dr., Suite 220, Barrington, IL 60010
Page 1 of 4
1.0/0407/TG
Advertisement
Summary of Contents for Badger Basket Wicker Doll Buggy 00569
- Page 1 WICKER DOLL BUGGY Assembly Instructions. Adult Assembly Required. Save these instructions for future use. This item is a toy for dolls only. For children ages (3) years and older. PRODUCT MODEL NUMBER: 00569 Actual product may vary slightly from shown. Visit us online at www.badgerbasket.com Toll-Free Customer Service: 1-800-236-1310 (Monday to Thursday 7:30 AM-4:30 PM CST) Web: http://www.badgerbasket.com/parts •...
- Page 2 PARTS AND HARDWARE: Check all parts and hardware listed. If anything is missing or you have questions, please DO NOT call the store or return the product to them. Contact us for assistance. Most problems are resolved without you needing to leave home. When emailing or calling us, please have this instruction manual and your product model number ready.
- Page 3 STEP 1 - PICTURE 1: Attach the HANDLE (A) to the HANDLE FRAMES (B) using TWO SHORT SCREWS (C). STEP 2 - PICTURE 2: Decide if you want the handle attached in front of the carriage or behind it (it can be removed and reattached, by an adult, in the other position at any time).
- Page 4 STEP 5 - PICTURE 5: Attach the FOUR WHEELS (K) to the AXLES (I). Squeeze the metal clip on the wheel to open it, slide the wheel onto the axle, and then release the clip so that it locks over the end of the axle. Gently tug each wheel to make sure the clip has popped into place and locked onto the axle.