Advertisement
Quick Links
MODEL #:
01905
NAME:
Round Doll Crib
TOOLS NEEDED: Phillips Screwdriver, Hammer
PARTS INCLUDED:
(A) 1 - Top Ring
(B) 4 - Leg Posts
(C) 4 - Long Screws (not shown)
(D) 15 - Dowels*
(E) 8 - Short Screws (not shown)
(F) 1 - Bottom Ring
(G) 4 - Caster Wheels
(H) 1 - Canopy Pole with Curve/Bend
(I) 1 - Metal Canopy Frame
(J) 1 - Fabric Skirt
(K) 1 - Fabric Sheet
(L) 1 - Mattress Pad
(M) 1 - Fabric Canopy
* IMPORTANT: 4 of the dowels have holes in both ends,
11 have no holes or a small hole in only one end
ASSEMBLY:
Ensure that all
the parts and
hardware listed above are
included. If anything is
missing, please do not return
the product to the store. Call
or e-mail us for assistance.
Toll-Free Customer Service: 1-800-236-1310 (Monday through Thursday 7:30 AM to 4:30 PM CST)
PLANT AND GENERAL OFFICE: PO Box 227, Edgar, WI 54426-0227 715-352-2311 Fax: 715-352-3163
CORPORATE OFFICE: 111 Lions Dr., Suite 220, Barrington, IL 60010
Page 1 of 3
BEFORE
YOU
BEGIN
Visit us online at www.badgerbasket.com
cs@badgerbasket.com
ASSEMBLY INSTRUCTIONS
Save these instructions for future use.
This item is a toy for dolls only.
For children ages three (3) years and older.
B
H
D
I
Adult Assembly Required.
A
F
L
G
M
K
J
1.0/0705
Advertisement
Related Manuals for Badger Basket Round Doll Crib 01905
Summary of Contents for Badger Basket Round Doll Crib 01905
-
Page 1: Assembly Instructions
MODEL #: 01905 NAME: Round Doll Crib TOOLS NEEDED: Phillips Screwdriver, Hammer PARTS INCLUDED: (A) 1 - Top Ring (B) 4 - Leg Posts (C) 4 - Long Screws (not shown) (D) 15 - Dowels* (E) 8 - Short Screws (not shown) (F) 1 - Bottom Ring (G) 4 - Caster Wheels (H) 1 - Canopy Pole with Curve/Bend... - Page 2 PICTURE 1 STEP 1: See PICTURE 1. Attach the FOUR LEG POSTS (B) to their designated spots on the TOP RING (A) using the FOUR LONG SCREWS (C). Attach the FOUR DOWELS WITH TWO HOLES (D) using FOUR SHORT SCREWS (E). The positions of PICTURE 2 these four dowels may vary from shown in Picture 1.
- Page 3 PICTURE 4A PICTURE 4B PICTURE 5 K, L STEP 4: See PICTURES 4A and 4B. Insert the CANOPY POLE (H) through the hole on the TOP RING (A) and push it down until it rests in the hole on the BOTTOM RING (F). Insert the two free ends of the METAL CANOPY FRAME (I) into the top of the CANOPY POLE (H).