Access HD DTA1080D Quick Start Manual

Quick Start Guide
1
CONNECTING YOUR DIGITAL CONVERTER BOX
Connect the antenna to the ANT IN jack on the back of the converter box.
1
Using the supplied RF Coax Cable, connect the RF OUT jack on the back of
2
the converter box to the ANTENNA IN jack on the back of your TV.
(NOTE: You may also connect converter box to TV with optional RCA Audio/Video Cables)
Connect the small end of the Power Supply to the DC IN jack on the back of the
3
converter box; and plug the other end into a power outlet or surge protector.
Turn ON the converter box and TV.
4
Set your TV to Channel 3 to match the default CH3 setting of the converter box.
5
Rev. June 5, 2008
2
Access HD® is exclusively distributed by GXi International, LLC
3
Page 1 of 2