Advertisement
Quick Links
General Information
The WIFI-enabled smart hub could be used for security alarm, elder care,
ZEM-1000 / ZEM-1001 / ZEM-1002
and wireless doorbell. It allows you to get updates and change setting with
smartphone anytime anywhere.
Smart Home WiFi Security
Main Features
Alarm Receiver
WIFI-enabled cloud security alarm system
User Manual
App-based control and monitoring
Know exact sensor that triggered in seconds
Plug and play, easy setup in less than ten minutes
Change setting and get live updates from miles away
View the entire system or a single sensor anywhere anytime
Easy to remove and take with you
Built-in strobe siren, 80 decibels of volume
Customize your system, expandable, supports up to 50 wireless
accessories
Customizable alert for each sensor
More than just an alarm system, doorbell and video monitoring are
optional
How does it work?
www.zemgoalarms.com
Pairing/activate the PIR (ZEM-1005)
Edit/Delete accessories
In order to pair the PIR make
Long press the accessories name on your spmartphone, then you can edit
sure you have removed any
the accessories' mode, type, name, or delete the accessories.
battery paper from the PIR.
Then you will wave your hand
in front of the PIR until you
1) The hub will recognize remote and
see a blue light from the PIR.
doorbell button automatically, the
Once you see this, it should
other sensors you should edit the
be followed by a beeping
type after added.
sound from the hub that
indicates that the PIR has
2) You could rename the enrolled
been paired.
sensor to get a user-defined alert
3) You could disable/enable each
Pairing/activate the Key Fob (ZEM-1006)
sensor anytime anywhere
In order to pair the Key Fob make
sure you have removed any
battery paper from the Key Fob.
Press any button on the Key Fob
4) There are four modes for each sensor:
then you will see a blue light come
on from the Key Fob followed by a
beeping sound from the hub that
Normal: In arm mode, when normal sensors are triggered, system
will alarm. In disarm mode, when normal sensors are triggered, system
indicates that the Key Fob has
will not alarm.
been paired.
Home (bypass): In home mode, only normal sensor will be triggered and
home sensors will not be triggered while alarming, this will allow user to
move freely at home.
Pairing/activate Doorbell Transmitter
(ZEM-1007)
24 hour: Regardlesss the system is armed or disarmed, when 24 hour
In order to pair the Doorbell
sensors are triggered, system will alarm at once.
Transmitter make sure you have
removed any battery paper from
Delay: In arm mode, when delay sensors are triggerd, system will
the it. Press the button on the
alarm after the entry delay time you have set.
Doorbell Transmitter then you will
see a blue light come on from the
Doorbell Transmitter followed by a
beeping sound from the hub that
indicates that the Doorbell
Transmitter has been paired.
System Overview
APP Download
ZEM-1000 / ZEM1001 / ZEM-1002
Scan the QR codes below or search the keyword "Zemguard" on
APP store for IOS or "Zemguard" on Google Play for Android to download
the APP.
Zemguard
Turn ON AP mode:
Press the button for 5s, the hub will come with a continuous beeping
APP and Smart Alarm pairing
sound, blue light flash, then the WIFI hot spot is opened.
1. Power on the smart alarm hub.
And then connect your cellphone to the WIFI hotspot named
2. Turn on AP mode by long pressing
button , when the blue light
Sa****, the default password is 12345678.
is quick blinking and the siren is beeping, it is under AP mode. Short
press
button to exit AP mode.
Turn ON pairing mode/Reset:
3. Find the WIFI hotspot that starts with "SAxxx" in your mobile phone
Turn on paring mode:Short press this button to turn ON pairing mode.
WIFI list to connect to the hub, the default password is 12345678, AP
Reset: Long press the button until 2 beeps heard.
mode will be on for 5 minutes and exit automatically.
Long press the button to turn on/off the machine.
Fig. 1
AC plug
Voltage: AC110~240V; EU, US, UK, AU plug optional
LED lighting definitions:
Arm: The red light is on always
Find the WIFI hotspot emitted by the smart
Disarm: The red light is off
hub whose name starts with "SAxxx", the
Bypass: (Home mode) the pink light blinking slowly
default password is 12345678
WIFI connection successful: Blue light on
WIFI connection is invalid: Blue light quick blinking
The hub is connected to serve: Blue light flashes once every 5s
Note: After paired successfully, the smart
hub will stop beeping
Alarming: Pink light blinking and buil-in siren hooting
4. Launch the Zemguard APP, tap the add button "+" and select "Cloud Security
Alarm System".
Other operation and setting
APP Operation and Setting
WIFI setting: connect the smart hub WIFI.
AP setting: modify the name and password of hotspot.
Modify password: Modify the password of hub.
Add accessories
Turn on pairing mode, activate the sensor to send a signal to the hub, you
will hear a beep when the piaring is successful.
Sharing the device
User could easily share the device with your loved ones by scanning the
QR code.
Reset
Press the pairing button for 5s to reset to default setting and succeeded with
System setting
a long beep. After the reset, all accessories and WIFI information will be
cleared.
Hooting time of siren: the time that siren will hoot while alarming, the initial time
is 1 min.
Accessories
Arm delay: Exit delay gives you time to exit after arming.
Alarm delay: Entry delay gives you time to disarm the system upon entry, before
an alarm occurs. Only the delay sensors are invalid, the non delay sensors will
Remote Control (ZEM-1006)
be triggered normally.
Timing arm/disarm: You can set up the system to arm/disarm automatically at a
defined time every day.
Prompt tone for remote: you can turn on/off the prompt tone while using remote
control.
Timing arm/disarm ON/OFF: Turn on/off timing arm/disarm.
Language: change the notification language.
Server setting
*Important: modify the setting may cause fail of pushing notification.
Heartbeat time: the interval time of smart hub uploading data to server,
default time is 60s.
The remote control is easy to carry, it can be used to set the system to
Server IP: the IP address of server
Arm/Disarm/Home or activate an alarm at touch of the SOS button.
Server Por: the port of server
You can also remote arm/disarm/bypass the system using smartphone
APP.
5. Tap "LAN search" and select the device ID from search result, enter device
Fig. 6
Fig. 7
Fig. 8
name and password, tap the confirm button to save. The initial password is
1234.
Fig. 2
Fig. 3
Tap the Device ID.
Keep in mind that your device
ID located in this section will
also be used as the SN
number to Sync the device
with Amazon Alexa, so please
make sure that you take a
note of this number. You will
need it for the amazon Alexa
sync on page 7.
Enter device name and
Note: Make sure the smart hub is under AP mode and your
password.
smartphone is connected to the smart hub during WIFI setting.
Note: The initial device password is 1234, the device name is
Smart Alarm Alexa Skill User Guide
user-defined
How to make my Smart Alarm work with
6. In order to setup the Zemgo Hub to your local Wi-Fi Settings, go into the Control
Page by Tapping on the added device, tap the Setting button and select " Wi-Fi
Amazon Echo/Tap/Dot?
Setting" from the drop down list, Tap " Wi-Fi management". Here you will find a list
of Wi-Fi selections, please choose your Wi-Fi router and include your Wi-Fi
Before we start, we need to make sure that you have a Smart Alarm and it is
password. The blue light will flash once for around 5S and then it will show that
connected to Wi-Fi, please make sure that you have completed the steps on page
you have connected your Zemgo hub successfully to your Wi-Fi router.
3, 4 and 5 before you sync the Zemgo hub to Amazon Alexa.
Fig. 4
Fig. 5
Step 1: Download and install Amazon
Alexa App to your smartphone.
Tap WIFI setting to configure
the WIFI of the hub
Step 2: Log in the Amazon Alexa APP
using your Amazon account.
Step 3: Use the hamburger menu icon to go into the Skill page.
Step 4: Search "Smart Alarm" in the search bar to enable the
SSG Smart Alarm Skill.
The remote control is easy to carry, it can be used to set the system to
PIR Motion Sensor (ZEM-1005)
Arm/Disarm/Home or activate an alarm at touch of the SOS button.
You can also remote arm/disarm/bypass the system using smartphone
The detector adopts digital logic control processing technology and
APP.
intelligent analysis algorithm, effective resolution of interfering signal
and human movement signal, preventing false alarm. It features
Arm: All zones/sensors are armed
automatic temperature compensation, and resistance to flow
Disarm: All zones / sensors are under the disarmed status, except the
technology, adapting to environmental and temperature change. It can
zones / sensors which is under 24-hours Arm mode.
detect human movement within the 6-meter cone space, suitable or halls,
Home (bypass): All the zones/sensors are armed except the home mode
hallways, etc.
sensors.
Contact Sensor (ZEM-1004)
Installation method: mounting the motion sensor on the wall with the bracket and
screws,the recommended installtion height is between 1.8m to 2.7m.or just put it
The window/door sensor can be installed on doors, windows, and any
on the ground,table or other plat places.
other objects that can open and close. The sensor transmits signals to
the control panel when a magnet mounted near the sensor is moved
away.
Installation method: choose a proper way in your door/window, we suggest
you do not mount the sensor on the door/window which made of metal,
because it willl interfer the signal and shorten the distance of receive the
signal. Clean up the place you want to mount the contact sensor, tear the
tape.
Change battery: anticlockwise to move and open the base cover to change
the battery.
Doorbell Bell Transmitter (ZEM-1007)
Open from here
Button&LED indicator
The smart hub will ring when the doorbell button
is pressed, and it will push an instant alert to
your smartphone simultaneously.
Leave message here
Installation method:
Mounting the doorbell push button on the outside of your door
Note: the gap between the transmitter and magnet should less than 1cm
with the included adhesive tap
"Alexa, tell Blue Dog to disarm"
Definition: This allows you to disarm the system using voice control.
"Alexa, ask Blue Dog state"
Definition: Alexa will be able to tell you what status the alarm is in. For example:
" Alarmed" or "Disarmed".
"Alexa, tell Blue Dog ringing"
Definition: The hub will ring ding dong. This can be used to send an alert around the
house. For example, in the morning the kids are still sleeping upstairs and it is time
to get up for school and breakfast is ready. Then the parents can use this command
to wake up the kids.
"Alexa, tell Blue Dog alarming"
Definition: The hub will sound an alarm. This is used like a panic button feature. If
there is some type of emergency, you can say this command and the alarm will
sound to advise someone in the house that there is something wrong.
"Alexa, tell Blue Dog to mute"
Definition: This will mute the alarm. So, when you have triggered the alarm with the
Step 5: Enter your Smart
"Alexa tell blue dog alarm" and you want to turn off the siren, you will use this feature.
Alarm's SN and Password
You can also get the
in the pop up window and
SN by long pressing
Note: If your Android system's smartphone can not make Amazon Alexa connect with
tap "Sign In". The SN of
the device on the main
Smart Alarm, please kindly complete the connection by your computer.
your Zemgo Device is the
control page of the
same as the Device name
Zemguard App,then tap
shown on page 4 Fig. 3.
"Copy the SN" on the
pop-up menu.
Step 6: Tap "Grant" to link your Smart Alarm with your Amazon Alexa account, once
your accounts have been linked succesfully, you should see a success screen, now
you can start controllling the Smart Alarm with Echo/Tap/Dot using voice command,
such as:
"Alexa, tell Blue Dog to arm please"
Definition: This allows you to arm the system using voice control.
Maintenance
Troubleshooting
1. The smart hub doesn't respond to APP operation.
The following suggestions will help prolong the service life of the system.
a) Check whether the local network is working.
b) Make sure the smartphone is connected to internet.
1. Keep this product and accessories out of children's reach.
2. Keep the product and accessories dry. Rainwater, moisture and liquids
2. Remote control doesn't work.
are likely to contain minerals that will corrode electronic circuits.
a) Check if the remote control has been paired to the smart hub
3. Do not use or store the system in dusty or dirty places, otherwise it may
b) The distance between the smart hub and remote control is too far away.
damage the electronic components.
4. Do not expose the system to high temperature. High temperatures can
3. Smart hub can't respond to sensor/detector.
shorten the life of electronic components, damage batteries, and cause
a) Check whether the system is armed
melting deformation of plastic parts.
b) Check if the sensor/detector has been paired to the smart hub.
5. Do not store the system in cold areas. Otherwise, when the temperature of
c) Check if the sensor/detector is far away from the smart hub.
the alarm system rises to the normal level, moisture appears inside,
damaging PCB.
3. Fail to connect the smart hub to router.
6. Test the system regularly and perform troubleshooting in time.
a) Make sure the smart hub is under AP mode and your smartphone is
7. Check the built-in batteries of accessories regularly. If the batteries are
connected to the smart hub during WIFI setting.
low, replace with new ones.
b) Reset the smart hub and try again.
8. It is recommended to cut off the power if the system is not used for long
time.
9. If the alarm system is covered with dirt, wipe off the dirt with soft cloth or
Specifications
tissue. For stains, apply diluted alkaline detergent to soft cloth, wring the clot
out and wipe the product. Then, dry the product with dry absorbent cloth.
Smart Alarm Hub
Please carefullly read and strictly follow the previous suggestions. If the
The "brain" of the system, with sound & flash, get a live updates and
product remains faulty, you can send it to the place of purchase or authorized
change setting anytime anywhere.
maintenance center for maintenance. We will provide help as soon as
possible.
Operating Voltage: 100-240V AC 50/60Hz
Wi-Fi standard: 2.4GHz 802.11b/h/n
Stand-by power consumption: <2W
Operating RF: 433.92MHZ
The maximum number supported for wireless accessories: 50
Material: ABS
Alarm volume: 80dB
Working temperature: -20°C~+50°C (-4°F~+122°F)
Working humidity: ≤85%
Add/Delete/Edit Accessories
Set Up Pairing on Hub
Method 1 (Fig. A): Short press the pairing button on the hub to enter pairing
mode,activate the accessory and succeeded with a beep.
Method 2 (Fig. B): Start pairing mode from APP.activate the accessory and
succeeded with a beep.
Add Accessories
Fig. A
Fig. B
Pairing/activate the Door / Window Contact (ZEM-1004)
1. Please make sure you have both pieces of the door / Window contact close
together. (Fig. C)
2. Now you should separate both pieces of the Door / Window contact until you
see a blue light from the contact and it will be followed by a beeping sound from
the hub, this indicates that you have successfully paired the contact. (Fig. D)
Fig. C
Fig. D
Advertisement
