TP-Link Archer T2UH Quick Installation Manual

Quick
Installation
For Mac OS X
Guide
AC600 High Gain Wireless Dual Band USB Adapter
MODEL NO. Archer T2UH
This USB Adapter can be powered only by computers that comply with Limited
7106506630 REV3.1.0 Power Source (LPS).
1
Connect to a Computer
Option 1: Directly Option 2: Via the USB Extension Cable
3
2
Install Driver and Utility Join a Wireless Network
a. Insert the CD. Option 1: Via TP-LINK Utility
Note:
a. Select the Site Survey tab of the pop-up
You can also download the driver at www.tp-link.com.
b. Browse the CD, go to Archer T2U_T2UH > utility window.
Mac OS X Driver, unzip the
b. Select your Wi-Fi network and click
TP-LINK_Installer.dmg file and run the
CONNECT. The connection status can be
Installer.
viewed on the Link Status screen.
c. Follow the wizard to complete the installation.
Pro le
SSID
TP-LINK_XXXX 72 - 10 -18 - 01 - 00 - 03
TP-LINK_0903
TP-LINK_0001
TP-LINK_0306 00 - 10 -18 - A9 - 5D - 8D
SHELL
Installer.pkg uninstall.command
Disconnected ! !
Option 2: Via Wi-Fi Protected Setup
a. Press the WPS button on your router.
b. Within 2 minutes, press and hold the WPS button
on the adapter until the WPS progress indicator
bar appears.
Wireless Utility
Link Status Site Survey Statistics WPS About
AP List
BSSID Signal Channel Authe... Encr... Network Type
5 6 WPA2- PS AES Infrastructure
02 - 10 -18 - 01 - 00 - 02 2 36 WPA2- PS AES Infrastructure
00 - 51 - E1 - 02 - 20 - 44 7 11 Open NONE Infrastructure
29 5 Open NONE Infrastructure
c.
When you are prompted "PBC-Get PBC profile
successfully", it is complete.
RESCAN CONNECT ADD PROFILE
(WPS)