Advertisement
Quick Links
Installation Instructions:
Models: JTK-HID303S-20E JTK-HID303N-20E & JTK-HID303F-20E
JTK-HID303S-39E JTK-HID303N-39E & JTK-HID303F-39E
JTK-HID303S-70E JTK-HID303N-70E & JTK-HID303F-70E
CAUTION:
For Use with WAC J" & "J2" track systems. Fixture may also be used on other manufacturers brand of track
(consult factory for compatibility).
CAUTION – To reduce the risk of a burn during relamping, remove from the track before relamping.
Read all instructions before installing.
Installing on Track:
1. Note the track has a groove running its length to indicate polarity.
2. Insert adapter into track slot and rotate it 90° the embossed arrow on the
adapter should point to the grooved side of the track.
3. Push up and turn the locking tab into the lock position.
4. Removal is the reverse procedure. Tracks may be positioned anywhere
along the track length.
5. Vertical and horizontal aiming have push lock buttons to secure settings.
2
Rotation lock
Metal Halide Track Fixture – LARC Series
Adapter
Embossed arrow
Rotation lock
Locking tab
Aiming lock
Re-Lamping:
1. Use appropriate protection when handling hot lamps.
2. Turn power off at main switch.
3. Turn lens cap counterclockwise to remove.
4. Grasp lamp with a clean cloth and pull straight out to remove.
For JTK-HID303S-20E and JTK-HID303N-20E and JTK-HID303F-20E
5.
Use T4 metal halide G8.5 base lamps 20W only.
For JTK-HID303S-39E and JTK-HID303N-39E and JTKHID303F-39E
Use T4 metal halide G8.5 base lamps 39W only.
For JTK-HID303S-70E,and JTK-HID303N-70E and JTK-HID303F-70E
Use T4 metal halide G8.5 base lamps 70W only.
Installation is the reverse procedure.
6.
Note: Metal halide lamps require several minutes of operation to reach full
brightness. If power is interrupted lamps will take several minutes to re-
strike. This is a normal characteristic of metal halide lamps.
3
Retain these instructions for future service and adjustments
615 South Street, Garden City, NY 11530
Tel: (516) 515-5000 Fax (516) 515-5050
www.waclighting.com
Advertisement
