Advertisement
Quick Links
Opening Table:
1) Release storage latch by lifting storage latch handle. Table should open slighlty. See Figure #1.
2) Use both hands at top of benches to push downward to floor. Depending on operator size, you may place one foot at the
bottom of the end leg to help push open while pushing on benches. See Figure #2.
3) Continue pushing down until table top reaches the 2/3rd's cleaning mode. The table will stop opening at this point.
4) Release center down lock bar by lifting the bar with one hand while lifting slightly up on bench with other hand.
5) Proceed to lower table to floor. Once down lock bar passes the hinge slot continue to push table down with both hands.
See Figure #3. Be sure down lock is engaged into hinge slot. You may need to push down on tops to engage.
Folding For Storage:
1) Lift down lock bar with one hand and begin lifting upward by grasping bench and lifting with other hand. You first may need to
push down on the tops to release bar.
2) Once table is partially lifted continue lifting by pulling upward on bench supports with both hands. See Figure #4.
3) Re-grip table by pushing in the middle of benches with both hands until storage latch engages. See Figure #5.
Mobile Table Fixed Bench
Operating Instructions:
METB / MTFB8 / MTFB10/ MTFB12
Table should be moved and operated by
authorized adults only! Children and
students should NEVER move or operate
tables. Always engage storage latch to
prevent tipping. Failure to follow warnings
may result in serious injury or death.
To avoid tipping over, only push from side of
table. DO NOT push from the table top side!
Avoid rolling table over debris on the floor.
Standard Maintenance:
To ensure table life & quality operation; check & tighten
fasteners & lubricate pivot points every (6) months.
WARNING:
WARNING:
[#101-005-NPS] rev. 05/2015
Advertisement
