HDanywhere MHUB PRO (8X8) 70 Quick Start Manual

QUICK START GUIDE
8x MHUB PRO (8X8) 70 RECEIVERS + 16x MOUNTING WINGS
M H UB
1 2 3
PR O
The steps below describe how to connect a single HDMI source to a display location for outputs A-H and enable remote control (IR) signals to be sent from that location back to your
Connect a HDMI source device (e.g Satellite/Cable TV, Apple TV, Blu-ray, DVD
1
etc) to one of the ports labelled "SOURCE INPUT" on the MHUB chassis using a
good quality HDMI cable.
Connect a CAT cable between one of the HDBASET output ports (labelled A-H)
2
on the MHUB chassis, and the "HDBASET" port on the MHUB receiver, power on
the matrix via the included IEC cable.
1
HDMI CABLE
CAT6 CABLE
INFRARED (IR) CABLE
NETWORK CABLE
1 2
POWER
C AT 6 RE SO LUT I O N / D I S TA N C E G U I DE
0m 10m
0ft 32ft
F ULL MANUAL O N HDANY WHE R E . C O M / S UPPO RT
IN THE BOX
2x CHASSIS MOUNTING WINGS
4 5 6 7 8
MHUB chassis. Repeat the steps below as necessary for each source or display.
4
6
3 4 5 6 7 8 E F G H
OK
2
20m 30m 40m
65ft 98ft 131ft
INFRARED (IR) CABLE
1x MHUB PRO (8X8) 70 CHASSIS
Connect a HDMI cable between the port labelled "HDMI OUT" on the
3
MHUB receiver and a HDMI port on your display. Ensure that your
display is switched to the correct input. Note: MHUB receivers do not
need any power cables to work, power is delivered from the MHUB
chassis. Check the white LED light on the MHUB receiver is lit, this
indicates a connection with the MHUB chassis. Check that you are
receiving a picture on the connected display.
To control your HDMI source from your display location, connect an IR TX to the
4
"SOURCE IR (OUT)" port on the MHUB chassis, that matches the "SOURCE
INPUT" port number for the source you want to control. Connect an IR RX to the
"IR (IN)" port on the MHUB receiver.
Test the IR control is working by using the source device remote pointed
5
towards the IR receiver at your display location.
To complete the installation, connect the MHUB "IP" port to your router via an
6
ethernet cable and follow the information on the attached 'Next Steps' sheet.
50m 60m
164ft 197ft
1
3
5
7
1x IEC POWER CABLE 1x CONTEXTUAL & 1x MASTER REMOTE
E F G
3
70m 80m 90m
230ft 262ft 295ft
2
4
6
8
H
OK
5
HD UHD
100m
328ft