Flexopower SK79 Instructions

Instructions Flexopower rollable solar kit
SK79 79W / SK158 158W / SK237 237W
Carefully follow the instructions below for successfully operating the SK79 / SK158 / SK237 solar kit.
The Flexopower SK79 / SK158 / SK237 4x4 kit is based on glass free, flexible solar panel technology and
includes everything needed to charge/manage the batteries from the sun: solar panel, protective carry
bag, solar regulator, cabling, connectors and user manual. Easy to install, plug and play principle. The
Flexopower SK79 / SK158 / SK237 4x4 kit is suitable for marine, desert and tropical environments.
1. Caution
- Do not fold SK79 / SK158 / SK237 solar panels
- Do not flatten SK79 / SK158 / SK237 solar panels when rolled up
- Roll up SK79 / SK158 / SK237 solar panels to the size of the bag only, do not roll up to smaller
size
- Do not erect under or near power lines
- Do not stand on, walk or drive over SK79 / SK158 / SK237 solar panels
- Do not tamper with cabling, equipment and connectors
- Do not pull on lead cables
- Always observe polarity: red/brown cable (+) positive; black/blue cable (-) negative
- Always use with a solar regulator with correct capacity
- The SK79 / SK158 / SK237 kit as described here is suitable only for 12VDC systems. Please
contact IBS GmbH or your local dealer if you operate a 24, 36 or 48VDC system.
2. Complete kit consists of
Rollable Panel
Rollable glass free solar panels with eyelets
and lead wire with 50A Anderson grey
connector
Protective carry bag with printed on
instruction
Solar regulator with LED display
LCD remote display [V,A]
Special ripcord twin core cable set 4mm
50 Amp Anderson grey connectors to connect
panel to regulator (long cable)
User Manual
Please note based on client feedback, no battery cable is included.
SK79_SK158_SK237_manual_rollable_en_V2.docx
SK79(SK79W) SK158(158W) SK237(237W)
1x
1x
1x 14A, 12V
no
2
with 1x 10m cable
1x
© Flexopower Desert Series. All rights reserved.
1
2x 3x
1x 1x
1x 14A, 12V 1x 20A, 12V
no no
2x 10m cable 3x 10m cable
1x 1x