Page 1
USER MANUAL CAMPLEX BLACKJACK-APTT Active Push-To-Talk headset adapters with volume control designed specifically for the Blackmagic ATEM Camera Converter BLACKJACK-APTT1 Camplex ATEM Headset Push-to-Talk Belt-Clip Active Adapter 4-Pin Female XLR BLACKJACK-APTT2 Camplex ATEM Headset Push-to-Talk Belt-Clip Active Adapter 4-Pin Male XLR...
Page 2
Features Ac ve Push‐to‐Talk Mic volume control and Ear volume control Use with professional PL intercom headsets Standard 6 foot TRRS male to male cable Heavy duty steel belt clip Aluminum housing provides audio noise shielding Package Includes Ac ve Push‐to‐Talk adapter unit 6 foot TRRS male‐to‐male cable 9V ba ery Camplex BLACKJACK APTT Page 2 ...
Page 3
1. Install the 9V ba ery in the BATTERY compartment. Close and secure. 2. Using the belt clip, secure the APTT adapter where it will be accessible by the operator. 3. Turn all knobs and controls to OFF or lowest se ngs before proceeding. 4. Connect your headset to the HEAD- SET jack on the BlackJack unit. 5. Using the 3.5 male‐to‐male 6 foot TRRS cable provided, connect the Blackmagic ATEM Camera Converter’s headphone jack to the ATEM jack on the bo om of the BlackJack unit. NOTE: Blackmagic ATEM Camera Converter ‐ The mic line circuitry and the headphone audio are together on the “Headphones” jack which is not indicated in the unit TRRS Cable specifica ons by the manufacturer. 6. Make sure all devices are connected to their power sources and turn them ON. Blackmagic ATEM Camera Converter Camplex BLACKJACK APTT Page 3 ...
Page 4
Features The POWER toggle switch turns the BlackJack unit on and off and has an LED pow‐ er ON indicator light. The latching TALK bu on on the BlackJack unit ac vates the Push‐to‐Talk (PTT) cir‐ cuit on the Black Magic ATEM Camera Converter. Pressing it opens the circuit for communica on. Pressing it again closes the PTT circuit and mutes the mic line on the headset connected to the PTT. This latching bu on does not need to be held down. The EAR knob controls the volume on the headset. The MIC know controls the sen‐ si vity of the mic on the headset. Camplex BLACKJACK APTT Page 4 ...
2. The temperature for installa on should be kept between 32°F to 140°F (0°C to 60°C). Avoid direct sunlight exposure or extreme changes of temperature over a short period of me. 3. Do not disassemble the unit nor put it on an unstable base. 4. Do not drop the unit and avoid heavy impact. 5. This unit should not be placed in a built‐in installa on unless proper ven la‐ on is provided. Any openings in the enclosure must not be blocked or covered as they protect the unit from overhea ng. 6. Before cleaning, unplug the unit from the mains outlet. Use a damp cloth. Do not use liquid cleaners nor aerosol cleaners 7. Do not overload outlets and extension cords as this may result in a risk of fire or electric shock. 8. Enclosure entry is dangerous. Never push objects of any kind, including liquids, into this unit through openings as they may touch dangerous voltage points or short‐out parts that could result in a fire or electric shock. 9. Do not a empt to open or service this unit yourself as opening or removing covers may expose you to dangerous voltage and other hazards. 10. There are no user‐serviceable parts inside the unit. If the unit requires service contact your authorized dealer, or an authorized repair service company. Camplex BLACKJACK APTT Page 5 ...