Advertisement
Quick Links
EXAMPLE OF 70V/100V SYSTEM CONFIGURATION
5 SPEAKERS CONNECTED IN PARALLEL USING 16W TAPS
NOTE: The total number of speakers multiplied by the tap value cannot exceed the output power (in watts) of the 70V
/100V amplifier. The above example shows 5 total speakers. Using the 16W taps, you will need an amplifier with at
least (5) x (16) = 80W. A good rule of thumb is to select an amplifier with 20% greater power; in this case, an amplifier
that delivers about 100W.
UNDERPOWERING VS. OVERPOWERING
2-CHANNEL AMPLIFIER WITH 8Ω OUTPUT
LEFT
8Ω
2 SPEAKERS PER CHANNEL CONNECTED IN PARALLEL
TECHNIAL SPECIFICATIONS
Model
OWM-5
Frequency Resp(-10dB)(Hz)
60-20K
Sensititivy(1W /1M)(dB)
90
Impedance(ohm)
8
60
RMS power(watts)
120
Peak power(watts)
Transformer tapes
Without
Environment
IP56
Product Dimensions(mm)
190x256x225
3
70V/100V
C
Observe correct
Polarity for maximum
Bass performance
RIGHT
8Ω
OWM-5T
60-20K
90
8
60
120
70V:32-16-8-4-2-1W & 8ohms
100V:32-16-8-4-2W & 8ohms
IP56
190x256x225
INSTALLATION INSTRUCTIONS
OS-5
User Manual
English
Outdoor and Indoor
SPEAKER
Advertisement
Summary of Contents for SBOX OS-5
- Page 1 EXAMPLE OF 70V/100V SYSTEM CONFIGURATION 70V/100V 5 SPEAKERS CONNECTED IN PARALLEL USING 16W TAPS OS-5 NOTE: The total number of speakers multiplied by the tap value cannot exceed the output power (in watts) of the 70V User Manual /100V amplifier. The above example shows 5 total speakers. Using the 16W taps, you will need an amplifier with at English least (5) x (16) = 80W.
- Page 2 Introduction Thank you for buying outdoor and indoor speaker. Please read and have a thorough understanding of the entire manual before installation and use. Keep the manual for maintenance. Fasten A to wall by 4 screws Attach C to A and lock B to A , and fasten screws IMPORTANT: LumiAudio has made every effort to provide accurate and detailed instruction for this product’s assembly and installation.