Magnadyne M9999-SWR2 Installation Manual

Location and Function of Controls at a Glance
1. Attach the remote holder base to the inside
edge of the steering wheel using the strap
supplied as shown in figure 1. Make certain
that the arrow engraved into the remote
holder base is facing the driver. Secure one
end of the strap to the outer edge of the
remote holder base as shown in figure 1.
Pull the strap snug around the steering
wheel and secure the strap to the cleats on
the holder base. Some stretching of the strap
will be required but do not over-stretch the
strap.
Remote
Holder
Strap Arrow
Steering Wheel
Figure 1
2. Cut the extra portion of the strap near the
center of the remote holder as shown in
figure 2.
Figure 2
Steering Wheel Remote
Installation Guide for the M9999 Stereo
3. Attach the remote holder cover loosely to the
holder base using the screws supplied as
shown in figure 3. Adjust/rotate the remote
holder assembly to the desired position and
tighten the screws.
Remote Holder
Cover
Figure 3
4. Attach the Remote Control unit to the Holder
as shown in Figure 4 until a "click" sound is
heard. To remove the Remote Control unit
from the Holder, press the Ribbed Switch
toward the steering wheel, then slide the
Remote Control off the Holder.
Ribbed
Switch
Figure 4
Model: M9999-SWR2 / M9999-SWR1
WARNINGS
• Do not install this Steering Wheel Remote in
a location where it prevents the proper
operation of safety devices such as air bags.
• Do not install this unit in a location where it
prevents the proper operation of the steering
wheel or gearshift lever.
• Do not install this Steering Wheel Remote in
a location that may obstruct the driver's view.
• Do not install this unit to the outer edge of
the steering wheel, it may interfere with
driver's ability to steer the vehicle which
could result in a traffic accident. Always
attach this unit to the inside edge of the
steering wheel as shown in Figure 5.
• Mount this unit securely to the steering
wheel. If this unit is loose, it may interfere
with driver's ability to properly steer the
vehicle.
• Installation of this unit requires special skills
and experience and should be entrusted to a
trained technician.
• Install this unit using only the parts supplied.
If other parts are used the unit may be
damaged or could dismount itself, which
could result in a traffic accident.
• Only install this unit as illustrated in this
manual.
Incorrect Location
Correct Locations
Figure 5