AMX CBL-HDMI-FL2-16 Quick Start Manual

Overview
Flat cables benefits include weight reduction, space efficiency, flexibility and strength.
AMX flat cables feature MyTurn Ready Over-mold connector ends. With the addition of a
MyTurn™ Source Selection Button (FG554-21) that clips into the specially designed
groove built into the connector housing, participants can switch their content to the
display at the press of a button without moving from their seat.
The MyTurn Source Selection Button communicates with a MyTurn Source Selector
Receiver (FG554-23) which connects to a Solecis digital switcher, AMX master
controller (with I/O), or DVX all-in-one presentation switcher. Any MyTurn-Ready cable
may be equipped with the MyTurn solution.
HDMI 4K60 MyTurn-Ready Flat Cable
The HDMI directional cables (CBL-HDMI-FL2-xx) are available in 16 and 32 ft lengths.
The end labeled Display connects to the display device (example: HDTV monitor) and
has a built-in lock-down screw. The source end of the cable is not labeled (FIG. 1): .
Source End MyTurn-Ready Over-mold
FIG. 1 HDMI DIRECTIONAL FLAT CABLE
CBL-HDMI-FL2-16/32 CABLE SPECIF ICATIONS
FG#: • FG10-2192-16 - 16ft (5m)
• FG10-2192-32 - 32ft (10M)
Cable Length • 16.4 ft or 32 ft (5m or 9.75m)
Connectors: • SOURCE: HDMI (male) - connects to the source device.
• DISPLAY: HDMI (male) - connects to the display device.
• Molded Strain Relief
Data Rate: • 18 Gbps
Signal Support: • 4K@60Hz
Color: • 48 Bits (16 bits per color)
Supported Features: • Deep Color, 3D, HEC, ARC
Plating: • 24K Gold
HDMI Directional Cable Notes
• Avoid using an extension cable on either end of the HDMI cables without using
AMX Powered HDMI 2.0 Cable Extender (FG558-21).
• Connecting the cable backwards, with the connector labeled "DISPLAY" into the
video source, will not damage the equipment. However when incorrectly installed,
the cable will not transmit a signal.
Cat6 Ethernet Flat Cable
The MyTurn-Ready Cat6 Ethernet cable (CBL-ETH-FL2-16) with integrated strain relief
(not MyTurn Ready) is 16 ft with a flat cable design
specifications for crosstalk and system noise, plus performance of up to 250 MHz
(suitable for 10/100/1000Base-T/TX and 10GBase-T).
CBL-ETH-FL2-16 CABLE SPECIF ICATIONS
FG#: • FG10-2194-16
Cable Length • 16.4 ft (5m)
Connectors: • RJ45 (male, both ends)
• Molded Strain Relief
Category: • Cat6
Data Rate: • 1000Base-T (Gigabit Ethernet)
Wiring: • 26 AWG
• 4 twisted pairs
• Single-core
Plating: • 24K Gold
RJ45
Matte Black Cat6 Ethernet Flat Cable
FIG. 2 CAT6 ETHERNET FLAT CABLE
Display End
• MyTurn ready Over-Mold
.
Cat6 features more stringent
RJ45
CBL-x-FL2-16
DisplayPort 4K60 MyTurn-Ready Flat Cable
The DisplayPort to DisplayPort (DP-DP) cable (CBL-DP-FL2-16) is directional and includes
an additional DP-HDMI adapter. The connector labeled Display must be connected to the
display device (example: HDTV monitor). The source end of the cable is not labeled
(FIG. 3): .
Source End
MyTurn-Ready Over-mold
FIG. 3 DP-DP DIRECTIONAL FLAT CABLE
CBL-DP-FL2-16 CABLE SPECIF ICATIONS
FG#: • FG10-2193-16 - 4K60 MyTurn Ready Flat Cable
Cable Length • 16.4 ft (5m)
Connectors: • SOURCE: DisplayPort (male) - connects to the source device
• DISPLAY: DisplayPort (male) - connects to the display device
• Molded Strain Relief
• MyTurn ready Over-Mold
Data Rate: • 18 Gbps
Signal Support: • 4K@60Hz
Color: • 48 Bits (16 bits per color)
Supported Features: • Deep Color, 3D
Plating: • 24K Gold
Included: • DP-HDMI adapter
Mini DisplayPort 4K60 MyTurn-Ready Flat Cable
The Mini DisplayPort to DisplayPort (mDP-DP) cable (CBL-MDP-FL2-16) is directional and
includes an additional DP-HDMI adapter. The DP connector labeled Display must be
connected to the display device (example: HDTV monitor). The mDP source end of the
cable is not labeled (FIG. 4):
MyTurn-Ready Over-mold
Source End
FIG. 4 MINI DP-DP DIRECTIONAL FLAT CABLE
CBL-MDP-FL2-16 CABLE SPECIF ICATIONS
FG#: • FG10-2196-16 - 4K60 MyTurn Ready Flat Cable
Cable Length • 16.4 ft (5m)
Connectors: • SOURCE: mDP (male) - connects to the source device
• DISPLAY: DP (male) - connects to the display device
• Molded Strain Relief
• MyTurn ready Over-Mold
Data Rate: • 18 Gbps
Signal Support: • 4K@60Hz
Color: • 48 Bits (16 bits per color)
Supported Features: • Deep Color, 3D
Plating: • 24K Gold
Included: • DP-HDMI adapter
DP Directional Cable Notes
• Connecting the cable backwards, with the connector labeled "DISPLAY" into the
video source, will not damage the equipment. However when incorrectly installed,
the cable will not transmit a signal.
HDMI Adapter
The DP-DP and mDP-DP cables come with an additional DP-HDMI adapter (FIG. 5). It
connects to the Display end of these cables to interface with HDMI ports on some displays or
the AMX HDMI Extender (FG558-21).
FIG. 5 DP-HDMI ADAPTER

QUICK START GUIDE

Flat Cables
Release button
Release button