Flexopower SK120 Instruction Manual

Instructions Flexopower Foldable Kit
SK120 12W/SK240 240W
Carefully follow the instructions below for successfully operating the Flexopower SK120 /240 4x4 kit.
The Flexopower SK120 / SK240 Solar Camping kit are based on foldable, glass free, flexible solar panel
technology and includes everything needed to charge/manage the batteries from the sun: solar panel,
solar regulator with a remote LCD display, cabling, connectors and user manual. Easy to install, plug and
play principle. The SK120 / SK240 4x4 kit are suitable for marine, desert and tropical environments.
1. Caution
Do not fold SK120 / SK240 solar panels other than in its default folding zones

Do not stand on SK120 / SK240 solar panels when folded up

Do not erect under or near power lines

Do not stand on, walk or drive over SK120 / SK240 solar panels

Do not tamper with cabling, equipment and connectors

Do not pull on lead cables

Always observe polarity: red/brown cable (+) positive; black/blue cable (-) negative

Always use with a solar regulator with correct capacity

The SK120 / SK240 kit as described here is suitable only for 12VDC systems. Please contact

Flexopower if you operate a 24, 36 or 48VDC system.
2. Complete kit consists of
Foldable Panel
Foldable glass free solar panel with lead wire and
50A Anderson grey connector
Solar regulator
LCD remote display [V,A]
Special ripcord twin core cable 4mm2 with 50
Amp Anderson grey connectors to connect panel
to regulator
User Manual
Please note based on client feedback, no battery cable is included.
SK120_SK240_manual_foldable_en_V1.docx
SK120 (120W)
1x
1x 14A, 12V
No
1x 10m cable
1x
© Flexopower Desert Series. All rights reserved.
1
SK240 (240W)
2x
1x 14A, 12V
No
2x 10m cable
1x