PCT -MA-B SERIES Installation Manual

Multimedia drop amplifiers

Hide thumbs

page of 1

/ 1
Bookmarks

Quick Links

Download this manual

Enlarged version

PCT-MA-B-xx / PCT-BEMA2-xx / PCT-NEMA2-xx / PCT-MA2-xx / PCT-MA210-xx

1, 2, 4, and 8 Ports

A. GENERAL INSTRUCTIONS

(OPTIONS 1 & 2)

1. Install type F-male connectorized

input coaxial cable to the "RF IN"

port.

2. Install type F-male connectorized RF

coaxial cable to the "RF OUT" port.

3. Verify AC voltage rating of power

source conforms with AC/DC

adapter.

4. Minimum power requirements

Active Return:

400 mA **

Passive Return: 250 mA

** Warning – Using a 250 mA power

adapter to power an active return

amplifier may result in:

a. Interference from hum, and

b. Overheating and premature failure

of the power adaptor.

PCT-MA-B-xx / PCT-BEMA2-xx / PCT-NEMA2-xx / PCT-MA2-xx / PCT-MA210-xx

1, 2, 4, and 8 Ports

A. GENERAL INSTRUCTIONS

(OPTIONS 1 & 2)

1. Install type F-male connectorized

input coaxial cable to the "RF IN"

port.

2. Install type F-male connectorized RF

coaxial cable to the "RF OUT" port.

3. Verify AC voltage rating of power

source conforms with AC/DC

adapter.

4. Minimum power requirements

Active Return:

400 mA **

Passive Return: 250 mA

** Warning – Using a 250 mA power

adapter to power an active return

amplifier may result in:

a. Interference from hum, and

b. Overheating and premature failure

of the power adaptor.

INSTALLATION GUIDE

MULTIMEDIA DROP AMPLIFIERS

Ver-2 20110106

B. FOR STANDARD POWERING

(OPTION 1)

1. Connect F-male connectorized RF

coaxial cable between

"PWR IN" port on the drop amplifier

and power adapter F-type

connection.

2. Connect the power adapter to AC

voltage source.

Without Power Inserter

INSTALLATION GUIDE

MULTIMEDIA DROP AMPLIFIERS

Ver-2 20110106

B. FOR STANDARD POWERING

(OPTION 1)

1. Connect F-male connectorized RF

coaxial cable between

"PWR IN" port on the drop amplifier

and power adapter F-type

connection.

2. Connect the power adapter to AC

voltage source.

Without Power Inserter

C. FOR REVERSE POWERING

(OPTION 2)

1. Connect an F-male connectorized RF

coaxial cable between the port

"RF OUT /PWR IN" on the drop

amplifier and the "TO AMP" port on

the power inserter (PCT-MPI-1G).

2. Connect the F-male connectorized

RF coaxial cable to the power

adapter and the "DC IN" port on the

power inserter.

NOTES:

This guide covers 1, 2, 4, and 8 port models. Images shown are of a 4-port amplifier.

PCT multimedia drop amplifiers can be ordered with or without a PCT-MPI-1G power inserter. If a power inserter is

required, it can be ordered separately. Please contact your local PCT sales office or representative for details.

w w w . p c t i n t e r n a t i o n a l . c o m

2260 W Broadway Rd | Mesa, Arizona 85202-1898 | USA

Tel +1.480.813.0925 | Fax +1.480.545.1080 | info@pctintl.com