Download Print this page

Advertisement

Quick Links

SCENE SET-UP
Install the Wallscape FX Activator
1
• Before installing your Activator, move the function
switch on the back of the Activator from "Try Me" to
"Play." This will enable full special e ects
functionality.
• Product is only intended to mount on a vertical wall.
• Locate stud in wall or use the wall mounting
hardware included to mount FX Activator as shown.
For best light e ect, mount FX Activator
approximately 4 feet (121cm) from the oor.
Note: For rooms with ceilings higher than 8 feet (243cm), you
may want to position the activator higher than 4 feet (121cm)
to ensure that the light su ciently illuminates the wall and the
ceiling.
2
Wall Decal Preparation
After removing the decals from the package, roll out the sheet
and lay at for 24 – 48 hours until the sheet no longer wants to
curl back up.
For best results apply the decals onto smooth, clean surfaces. The
decals may not stick to heavily textured surfaces. Do not apply to
fresh paint or wallpaper. Let the new paint/wallpaper dry for at least
3 weeks. Before applying the decals to wallpaper or other delicate
surfaces, test one in an inconspicuous area. Keep the decals away from
cribs and out of reach of young children to prevent choking hazard.
3
Create your Scene by placing the Wall Decals
To apply each decal, carefully peel it from the sheet. Then, place and
smooth the decal onto your wall in the desired location. To remove or
reposition each decal, just carefully peel it from the wall. Follow the
suggested scene layout or create your own scene. For the best illumination of
the scene, apply the decals within the general area shown in the "Scene
Set-Up."
On textured walls, periodically check the decals to make sure they remain at
against the surface. Gently smooth any parts of the decal that appear to be lifting o
the surface. Repeat as needed until the decals remain at against the surface.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE — DO NOT DISCARD
Questions? Visit unclemilton.com
WINTER JOURNEY
on your Wall
TM
DO NOT SKIP THIS STEP
MAGICAL
Wallscape FX Activator
Wallscape FX Activator
Hang
Hole
Battery
Cover
36 inches
91cm
TM
TM
TRY ME
PLAY
Scene Set-Up
Scene Set-Up
6 inches
15cm
4 feet
121cm
This product and its batteries must be
disposed of separately at your local
waste recycling centre. Do not dispose
them in your household waste bin.
5+
2831
Function
Switch
Floor

Advertisement

loading

Summary of Contents for Uncle Milton 2831

  • Page 1 MAGICAL WINTER JOURNEY 2831 SCENE SET-UP Wallscape FX Activator Wallscape FX Activator Install the Wallscape FX Activator on your Wall • Before installing your Activator, move the function switch on the back of the Activator from “Try Me” to Hang “Play.”...
  • Page 2 ® and TM designate • Do not dispose of batteries in re. Battery may explode or leak. trademarks of Uncle Milton Industries, Inc. • Batteries should be recycled or disposed of as per state and local guidelines. MADE IN CHINA ©...

This manual is also suitable for:

Magical winter journey