Quick Installation Guide
450Mbps Wireless N Dual Band PCI Express Adapter
TL-WDN4800
MODEL NO.
2
Software Installation
Insert the TP-LINK Resource CD into the CD-ROM
1
drive.
Find the model TL-WDN4800 and select Install
2
Driver&Utility.
7106504041
Package Contents
TL-WDN4800
Resource CD
System Requirement
· Windows 7
· Windows Vista
(The installtion procedures in Windows 7/ Vista/ XP are similar. Here takes the procedures in Windows 7 for example.)
The InstallShield Wizard window will appear.
3
Click Next to continue.
4
Select Install TP-LINK Wireless Con guration
Utility and Driver and then click Next.
1
Hardware Connection
450Mbps Wireless N Dual Band PCI Express Adapter
TL-WDN4800
MODEL NO.
QIG
Steps:
1. Turn o your computer and unplug the power cord from the computer.
2. Open the case. Locate an available PCI Express slot and remove its slot cover.
Keep the screw.
3. Insert the adapter into the PCI Express slot as shown above.
4. Secure the adapter with the screw removed in Step 2.
5. Close the case and insert the power cord back into the computer.
· Windows XP
6. Turn on your computer.
Click Change to specify the destination location
5
or you can leave it default. Click Next to continue.
6
Click Install to install the driver and utility for your
adapter.
You may see the Found New Hardware Wizard after the
adapter has been inserted. Please click 'Cancel'.
For Windows XP
For Windows Vista
The installation process may take 1~2 minutes.
7
The following screen will then appear.
8
Click Finish to complete the setup.