Page 1
BROWN INNOVATIONS QUICK INSTALLATION GUIDE SB-18 and SB-47 SonicBeam Be sure that you have the following: Myriad II Amplifier Power Supply Speaker Cables: USB Cable, Audio Cable, 3 (2 for SB-47) Conductor Speaker Wire, 3 Conductor Mic Wire 1) Connect the mic and speaker wire to the amplifier and the speaker.
Page 2
2) Connect audio cable to the amplifier and speaker. USB connection is used for software setting adjustments. There are no audio over USB capabilities. 3) Connect the power supply to the amplifier. Plug the power supply into an outlet.
Page 3
4) Push the power button in on the front of the amplifier. 5) Play the program on the player and check the speaker for sound. Trouble Shooting: No Audio but LED is on 1) Be sure power button is pressed in 2) Be sure mic and speaker wires are not swapped 3) Plug audio cable into alternate known source Can’t change volume...