Hitachi HUSSL4040BSS600 Quick Installation Manual

Quick Installation Guide

Hitachi Ultrastar SSD400S.B
SAS 6Gb/s Solid State Drive
Models: HUSSL4040BSS600
HUSSL4020BSS600
HUSSL4010BSS600
HUSSL4040BSS601
HUSSL4020BSS601
HUSSL4010BSS601
Handling precautions
• CAUTION: This drive can be damaged by
ESD (Electric Static Discharge). Any
damages incurred to the drive after its
removal from the shipping package and the
ESD protective bag are the responsibility of
the user.
• Do not open the ESD bag containing the
drive until you are ready to install the drive.
• Do not apply pressure on the drive during
handling and installation.
• To prevent damage from impact or vibration
always set the drive down gently.
• Handle the drive carefully by the edges.
• Save the packaging materials including the
ESD bag in the event that the hard drive
must be returned.
Page 1 of 2
Installing the hard drive
1. Record the serial number and part number
of your hard drive for future reference.
2. Turn off the computer and remove the
computer system cover.
3. Unplug the computer.
4. Before handling the hard drive, discharge
any static electricity from yourself and
your clothing. With one hand touch an
unpainted metal surface on the computer
chassis, and then touch the ESD bag with
the other hand for a minimum of two
seconds.
5. Remove the hard drive from the ESD bag.
version 1.0