Axor Citterio Kitchen Faucet 39850XX1 Technical Data Operating pressure: Recommended operating pressure: 14.5 - 72 psi Test pressure: Hot water temp.: Recommended hot water temp.: Rate of flow *Know and follow all applicable local plumbing codes when setting the temperature on the water heater.
Installation Place the faucet on the mounting surface. If the mounting surface thickness is 1 7/8” or less, install the plastic washer, friction washer, metal washer and mounting nut. Tighten the mounting nut. Tighten plastic washer the tensioning screws. friction washer metal washer mounting nut tensioning screws...
Page 4
Install the spout. Tighten the set screw. spout cam With the spout cam in place, the spout has a 150 rotation. By repositioning the spout cam, you can change the rotation. Repositioning the cam one “tooth” results in a 10 change.
Connect the hot and cold supply hoses to the supplies with 3/8” compression fittings (not included). Do not allow the hot and cold supply hoses to twist. Use two wrenches, as shown in the diagram. Tighten them wrench tight. Replacement Parts 1.1 screw cover XXX = Colors 001 chrome plated...
If you purchased the product for use primarily for any other purpose, including, without limitation, a commercial purpose, this warranty extends only (i) for 1 year, with respect to Interaktiv and Retroaktiv products, and (ii) for 5 years, with respect to AXOR, ShowerPower and Pharo products.
Page 7
THIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR: Conditions, malfunctions or damage not resulting from defects in material or workmanship. Conditions, malfunctions or damage resulting from (1) improper installation, improper maintenance, misuse, abuse, negligence, accident or alteration, or (2) the use of abrasive or caustic cleaning agents or “no rinse” cleaning products, or the use of the product in any manner contrary to the product instructions.