Acewell ACE-27 series User Manual

20170914
ACE-27xx/28xx series User's Manual
1.
2.
3.
4.
8.
5. ACE-2853
6.
Thank for purchasing an Acewell ATV/Motorcycle/Scooter computer. This
manual is specially designed for the ACE-27xx/28xx series. Each model has 4-6
LED indicators. Different models have different LED indicators; a fuel meter is
optional, but all other functions are the same. You may find that the photo above
has a set of LED indicators different from your computer; the photo is for
reference only.
PANEL DESCRIPTIONS
1. Bar Speed Scale
2. Bar Speed
3. 1st row display: Speedometer,
Maximum Speed
4. 2nd row display: Other functions .
Left-Direction Indicator/Green
Main-Beam Headlamp/Blue
Right-Direction Indicator/Green
Hazard Warning/ Red
P Parking/Green
Direction Indicator/Green
Trailer Flashers/Green
FEATURES
Includes analog and digital tachometer,
speedometer (300km/h), trip meter, odometer,
clock, average speedometer, maximum
speedometer, riding timer and cumulative riding
timer.
Computer unit has 4-6 built-in LEDs for different
purpose indicators.
LCD has two rows of digital and one analog
bar-graphic tachometer displays, with white LED
backlight.
Fast processor so can connect to pulse type gearbox
speed sensors.
Allows end user to adjust odometer when the
odometer is less than 30km /18.6 miles
Speedometer can show nearest 0.1 mph or km/h
speed if required by user. E.g. 100 or 100.5.
The computer's clock is always on, even when.
other functions are power-off.
Universal wheel circumference setting range of
1-3999mm.
Metric/ British system options.
Waterproof design.
SPECIFICATIONS
SPECIFICATIONS
FUNCTIONS
SYMBOL
Bar Tachometer 500-12,000 rpm
Digital Tachometer RPM
100-19,900rpm
RPM
Shift Warning
100-19,900rpm
MAX
Maximum Tachometer
100-19,900rpm
RPM
Speed Meter
2.3-300KM/h (187.5M/h)
Maximum Speed Meter MAX
MAX 2.3-300KM/h (187.5M/h)
AVG
Average Speed Meter
AVG 2.3-300KM/h (187.5M/h)
Trip Meter
0.0-999.9 Km (624.9 Miles)
TRIP 1&2
ODO
Odometer
0 - 999999 Km (0.0- 624999 Miles)
RT
Riding Time 0.00'00"- 99:59'59"
TT
Total Time 9999H59'
RTT
Total Hour Meter 0-9999H59'
Clock
0.00'00"- 24:59'59"
Bar-Fuel Gauge
+/- 100Ω, 250Ω, 500Ω options or Off 1-7 Bar-graphic
Power Input: 12VDC.
Speed Sensor: No Contact Magnetic Sensor.
Tachometer Input: CDI or Ignition-coil signal.
Wheel Circumference Setting: 1mm - 3999 mm (1 mm increment)
Operation Temperature: -10°C - +80°C (inner housing)
Storage Temperature: -25°C - +85°C (inner housing)
ATV Computer
www.acewell-meter.com
E
13 10R-022811
7.
5. RESET Button
6. MODE Button
7. Fuel Meter Bar: (optional)
8. LED indicator symbols
Engine Oil/Red
Neutral Gear/Green
N
R Reverse Gear/Red
D
Drive Gear/Green
Engine Coolant Temperature/Red
Rear Fog Lamp/Amber
Engine "Not In Use"/ Red
INCREMENTS ACCURACY
500 rpm
100 rpm
100 rpm
100 rpm
+/-1% or
0.1 KM/H or M/H
+/- 0.1(KPH/MPH)
+/-1% or
0.1 KM/H or M/H
+/- 0.1(KPH/MPH)
+/-1% or
0.1 KM/H or M/H
+/- 0.1(KPH/MPH)
+/- 0.1%
0.1 Km or Miles
+/- 0.1%
1 Km or Miles
+/- 50PPM
1 Second
+/- 50PPM
1 Minute
1 Minute
+/- 50PPM
1 Second/1 Minute +/- 50PPM
INSTALLATIONS & PARTS
ENGLISH
Main Unit Mounting
Rubber Pad
Washer
Spring Washer
Fixing Screw Nut
CDI
Ignition Coil
BAR RPM: Bar Graphic Tachometer
1. The bar graphic tachometer reading is always displayed at the bar graph.
2. Tachometer bar graphic displays up to 12,000 RPM.
RPM: Digital Tachometer
1. RPM is displayed in 2nd row.
2. Digital tachometer displays up to 19,900 RPM.
3. Tachometer signal picked up from either CDI or Ignition coil.
Shift Warning RPM
1. Function enables you to set up an RPM shift warning.
2. Bar-graphic tachometer flashes when RPM reaches pre-set value, and stops
flashing after you shift gear.
MAX RPM: Maximum Tachometer
1. MAX RPM is displayed on 2nd row.
2. Displays highest tachometer reading achieved after last RESET operation.
SPD: Speed Meter
1. Speed meter display is on 1st row of the screen.
2. Displays speedometer reading up to 300.0 Km/H or 187.5 mph.
MAX: Maximum Speed Meter
1. MAX is displayed on 1st row.
2. Displays highest speed achieved after last RESET operation.
AVG: Average Speed Meter
1. AVG is displayed on 2nd row.
2. Calculates average speed from last RESET.
TRIP 1 & 2: Trip Meter 1& 2
1. TRIP function registers cumulative trip distance from last RESET while bike is
being ridden.
2. Display is on 2nd row of screen.
ODO: Odometer
1. ODO accumulates total distance traveled.
2. ODO data is adjustable when it is less than 30km (18.6 Miles), after that it stored
in memory and cannot be reset.
RT: Riding Timer
1. Calculates total operation time from last RESET.
2. Count automatically begins with vehicle movement.
TT: Total Riding Timer
1. Calculates total operation time from the beginning of bike use.
2. Count automatically begins with vehicle movement.
3. TT data is stored in memory, even when power is off.
RTT: Hour Meter
1.Calculatew total engine operation time from last RESET
2.Count automatically begins with engine staring.
3.RTT data is stored in memory, and couldn't be reset.
12/24 hour Clock
It displays 12- or 24-hour current time.
Fuel Meter
1. Has 7 bargraphic indicator of fuel status.
2. Last bar flashes to indicate low fuel level.
Max8mm
sensor
Vibration Direction
Speed Sensor & Magnet Mounting
Attention：
1.This is universal sensor for ATV front
or rear wheel installation or motorcycle front
wheel installation. For some fitments an accessory
speed sensor holder may need to be purchased.
2.Find a rotating part to install magnet (for example
disk,sprocket or driveshaft)
and a location to install the sensor where it can be
aligned to the magnet.
3.Align the center of the magnet to center of side
face of the sensor.
4.Make sure the gap between the magnet and the
sensor is within 5 mm.
RPM Sensor Mounting
1. Signal intensity from ignition coli
RPM-INPUT
is dependent on vehicle type.
Either One
2. Circles 2-5 turns around ignition coil,
with more turns creating steadily signal,
2-5 Turns
fewer turns creating weaker signal.
3. The computer can use all type of ignition
system, only if the RPM is not stable you
must sometimes add the attached 1MOhm
resistor in the wire of the RPM input.
FUNCTIONS
Max8mm
sensor
Vibration Direction