hager 282D Installation Manual

282D
1.
2.
3.
4.
5.
6.
NOTE 1: BOLTS HAVE A MAX THROW OF 3/4"[19]. FIELD ADJUSTMENTS CAN
BE MADE TO ALLOW THE BOLTS TO EXTEND A GREATER DISTANCE, BUT THE
DOOR MUST BE TAKEN OFF THE HINGES TO MAKE ADJUSTMENTS TO THE
BOTTOM FLUSH BOLT!
NOTE 2: OPTIONAL DUST PROOF STRIKE 280X MAY BE USED.
283D
1.
2.
3.
4.
5.
6.
7.
NOTE 1: BOLTS HAVE A MAX THROW OF 3/4"[19]. FIELD ADJUSTMENTS CAN
BE MADE TO ALLOW THE BOLTS TO EXTEND A GREATER DISTANCE, BUT THE
DOOR MUST BE TAKEN OFF THE HINGES TO MAKE ADJUSTMENTS TO THE
BOTTOM FLUSH BOLT!
NOTE 2: OPTIONAL DUST PROOF STRIKE 280X MAY BE USED.
DRAWING NO: I-TA01031
HAGER COMPANIES
MORTISE THE INACTIVE DOOR USING HAGER TEMPLATE T-TA00177.
REFER TO THIS TEMPLATE DURING THE INSTALLATION PROCESS.
INSTALL FLUSH BOLT HOUSING IN THE DOOR EDGE USING SUPPLIED
SCREWS.
THREAD THE RODS INTO THE HOUSING THROUGH THE HOLES IN THE
TOP/BOTTOM OF THE DOOR. THE ROD SHOULD ATTACH USING A
CLOCK-WISE MOTION. ADJUST THE TOP ROD SO THAT THE TOP OF THE
BOLT SITS FLUSH WITH THE TOP OF THE DOOR WHEN IN THE RETRACTED
POSITION. ADJUST THE BOTTOM ROD SO THAT THE TOP OF THE BOLT
SITS FLUSH WITH THE BOTTOM OF THE DOOR WHEN IN THE RETRACTED
POSITION.
SLIDE THE HEAD GUIDES OVER THE BOLTS AND INSTALL IN THE TOP
AND BOTTOM OF THE DOOR .
INSTALL STRIKES.
HANG DOOR.
MORTISE THE INACTIVE DOOR USING HAGER TEMPLATE T-TA00180.
REFER TO THIS TEMPLATE DURING THE INSTALLATION PROCESS.
INSTALL FLUSH BOLT HOUSING IN THE DOOR EDGE USING (2)#8
COMBO SCREWS.
ADJUST THE TOP ROD SO THAT THE TOP OF THE BOLT SITS FLUSH WITH
THE TOP OF THE DOOR WHEN IN THE RETRACTED POSITION. ADJUST
THE BOTTOM ROD SO THAT THE TOP OF THE BOLT SITS FLUSH WITH THE
BOTTOM OF THE DOOR WHEN IN THE RETRACTED POSITION.
SLIDE THE HEAD GUIDES OVER THE BOLTS AND ATTACH TO THE FACE
PLATE OF THE BOLT HOUSING USING (2) 8-32 X 1/2" MACHINE SCREWS.
ATTACH THE HEAD GUIDES TO THE TOP AND BOTTOM DOOR EDGES
USING #8 COMBO SCREWS.
INSTALL STRIKES.
HANG DOOR.
139 Victor Street, St. Louis, MO 63104 - (800) 325-9995 - Fax (800) 782-0149
282D / 283D MANUAL FLUSH BOLT

INSTALLATION INSTRUCTIONS

REV: 01
SHEET 1 OF 1