Advertisement
Quick Links
INSTALLATION, OPERATION & MAINTENANCE INSTRUCTION
COMPRESSED AIR FILTERS
PRODUCT PURPOSE & FUNCTION:
Van Air's F200 series filters are designed to remove contaminants from compressed air systems. Available in 1/4" to 3"
connection sizes and flow capacities from 15 to 1600 SCFM (at 100 psig) in 16 housings and 9 filtration grades, the F200 series can
remove oil aerosols, oil vapors, water and particulates. Housings are made of cast aluminum. They are E-coated and epoxy powder
coated for corrosion resistance. All units include push-on elements with durable polyester drain layer (except RD grade).
Accessories include differential pressure indicators, wall mounting kits, connector kits, and automatic drain valves.
FILTER DETAILS
BLANKING
PLATE
FILTER
HEAD
FILTER
BOWL
ADM-2-2
(OPTIONAL)
OPERATING CONDITIONS
MAXIMUM WORKING PRESSURE
All Models
OPERATING TEMPERATURE
Minimum
Maximum
MAXIMUM RECOMMENDED INLET
TEMPERATURE
AA, A, RAA, RA, RB, and RC Series
B Series
C Series
RD Series
•
DO NOT REPLACE ANY ITEM ON FILTER WHILE IT IS PRESSURIZED.
•
DO NOT OPERATE A LEAKING FILTER. TAKE FILTER OUT OF SERVICE IMMEDIATELY.
•
DO NOT OPERATE ABOVE MAXIMUM WORKING PRESSURE (MWP) AT MAXIMUM OPERATING TEMPERATURE (°F).
F200 SERIES
PD-6 POP-UP
INDICATOR
(STANDARD)
INLET
THRU-BOLT
HOLES
INLET/
OUTLET
ELEMENT
ELEMENT
APPLICATION
SUPPORT
OIL
REMOVAL
(LIQUIDS)
250 PSIG
PARTICULATE
35°F
REMOVAL
(SOLIDS)
225°F
225°F
175°F
125°F
OIL VAPOR
80°F
REMOVAL
WARNINGS
FLOW DIRECTION THROUGH ELEMENT
(COALESCING)
IN/OUT
OUTLET
FILTRATION GRADES
ELEMENT
PURPOSE
GRADE
Extra Coarse
AA
Coalescing
Coarse
A
Coalescing
General Purpose
B
Coalescing
High Efficiency
C
Coalescing
Extra Coarse
RAA
Particulate
Coarse
RA
Particulate
General Purpose
RB
Particulate
High Efficiency
RC
Particulate
Vapor Adsorbing
RD
November 2016
P/N 432-10016-E
(PARTICULATE)
OUT/IN
INLET
NOMINAL
ELEMENT
PARTICULE
FLOW
REMOVAL
DIRECTION
25.00 μ
IN/OUT
5.00 μ
IN/OUT
1.00 μ
IN/OUT
0.01 μ
IN/OUT
25.00 μ
OUT/IN
5.00 μ
OUT/IN
1.00 μ
OUT/IN
0.01 μ
OUT/IN
0.01 μ
OUT/IN
OUTLET
COLOR
CODE
WHITE
GREEN
RED
BLUE
WHITE
GREEN
RED
BLUE
WHITE
PAGE 1
Advertisement
Summary of Contents for Vanair F200-15-1/4
- Page 1 November 2016 P/N 432-10016-E INSTALLATION, OPERATION & MAINTENANCE INSTRUCTION F200 SERIES COMPRESSED AIR FILTERS PRODUCT PURPOSE & FUNCTION: Van Air's F200 series filters are designed to remove contaminants from compressed air systems. Available in 1/4" to 3" connection sizes and flow capacities from 15 to 1600 SCFM (at 100 psig) in 16 housings and 9 filtration grades, the F200 series can remove oil aerosols, oil vapors, water and particulates.
- Page 2 13-3/4 33.7 **Flow is based on SCFM @ 100 PSIG @ 100°F. *Insert appropriate filtration grades here; for example F200-15-1/4-B. ****For total filter weight, add element weight to housing weight. ***Dimensions include filter housing, PD-6 and manual drain. FLOW CAPACITIES AT VARIOUS OPERATING PRESSURES (SCFM)
-
Page 3: Installation
INSTALLATION IMPORTANT Before installing filter, check operating temperature and pres- sure conditions to verify that they are within the specified INSTALL FILTER HEAD INTO THE PIPING WITH AR- ranges. (See Operating Conditions on page 1). Also verify ROWS POINTING IN THE PROPER DIRECTION TO that system flow rate corresponds to the rated capacity of ENSURE PROPER OPERATION. - Page 4 Finding a part number FIGURE 2A F200-15-1/4 THRU 25-1/2 REPLACEMENT PARTS Find the figure that references your filter. Find the replacement part you need and the item number of that part. 2 PLACES Find the item number in the first column of the Replacement Parts table.
- Page 5 REPLACEMENT ELEMENTS FILTER MODEL ELEMENT MODEL PART NO. FILTER MODEL ELEMENT MODEL PART NO. F200-15-1/4, E200-15/25-AA/RAA 26-10400 F200-500-2 E200-500-AA/RAA 26-10418 F200-25-3/8, E200-15/25-A/RA 26-10402 E200-500-A/RA 26-10420 & F200-25-1/2 E200-15/25-B/RB 26-10404 E200-500-B/RB 26-10422 E200-15/25-C/RC 26-10406 E200-500-C/RC 26-10424 E200-15/25-RD 26-10408 E200-500-RD 26-10426 F200-55-1/2...
-
Page 6: Mounting Bracket Dimensions
ACCESSORIES MOUNTING BRACKET DIMENSIONS TYPE MB-1 2-15/16" 1-9/16" 13/16" 1-3/4" 1/4" MB-1-2 2-15/16" 1-9/16" 13/16" 1-3/4" 1/4" MB-2 4-15/16" 2-3/8" 1" 2-9/16" 5/16" MB-2-2 4-3/4" 2-3/4" 1" 2-3/4" 5/16" MB-3-2 7-1/8" 4-15/16" 1-3/16" 3-15/16" 3/8" INSTALLED MOUNTING BRACKET KIT DIMENSIONS TYPE USED ON PART NO... -
Page 7: Maintenance
ACCESSORIES CONT'D PD-5 (P/N: 84-10001) PD-6 (P/N: 84-10125) FITS ALL MODELS EXCEPT F200-15-1/4 THRU 25-1/2. FITS ALL MODELS EXCEPT F200-15-1/4 THRU 25-1/2. 1" 1-11/16" 1-7/8" 3-3/8" 2-5/8" KIT INCLUDES (1) PD-6, (2) SCREWS, (4) O-RINGS & INSTRUCTION SHEET. PD-6A-C (P/N: 84-10126) 2-1/8"... - Page 8 SAFETY PRECAUTIONS Safety is everybody's business and is based on your use of good common sense. All situations or circumstances cannot always be predicted and covered by established rules. Therefore, use your past experience, watch out for safety hazards and be cautious. WARNING DANGER READ THE OPERATOR'S...