Download Print this page

Accurian 15-1937 User Manual

Networked home entertainment system

Advertisement

Quick Links

Networked Home
Entertainment System
All items shown below are sold separately. 15-1938 is
required for the PowerLine system to work.
PowerLine Digital Audio Sender
Includes Sender and Power cord.
15-1938
PowerLine Amplifi ed Receiver/ Speaker System
Includes Amplifi ed Receiver/Speaker, Satellite Speaker,
Speaker Wire, and Power cord.
40-1462
PowerLine Digital Audio Receiver/Amplifi er
Includes Receiver/Amplifi er and Power cord.
15-1937
Please read this user's guide before
installing, setting up and using your new product
www.radioshack.com
Thank you for buying the RadioShack Networked Home Entertainment
System. Now you can send high-quality digital stereo audio to any
room in your home that has an AC outlet, without running cable. This
system uses the existing AC electrical wiring in your home to send
digital signals.
1. Connect an audio source to your PowerLine
sender and plug into any AC outlet.
Signal
CD Player
Receiver
Path
Line In
Speaker In
Connection
Connection
Power
Note: Do not use two senders in the same place.
2. Connect PowerLine speakers to any AC outlet
in your home,
OR
BASS
VOLUME
BALANCE
TREBLE POWER
OR, Connect a PowerLine receiver to any AC
outlet in your home, and then connect to it, either
A) ...an audio source with speakers, or
B) ...non-PowerLine speakers.
A
B
OR
Line Out
VOLUME
BALANCE
POWER
Simply plug the audio outputs of any component – such as an A/V receiver, CD, or MP3 player – into the audio
inputs of the sender (#15-1938) and plug the sender into an AC outlet. Then, plug RadioShack PowerLine Digital
Receiver/Speakers (# 40-1462) into any electrical outlet in your home. If you have your own speakers, just plug
your RadioShack PowerLine Digital Audio Receiver/Amplifi er (# 15-1937) into any electrical outlet and connect
your speakers. Using this receiver, you can control the volume, balance, bass and treble of your remote speakers.
Best of all, the RadioShack Networked Home Entertainment System is completely portable.
1. Make certain that your audio source is powered off.
2. Connect the line level stereo outputs from the audio source, such
as a CD player to the sender's AUDIO IN. Match LEFT to L and
RIGHT to R.
Or,
Connect the surround or speaker outputs from your Home Theater
System or A/V receiver to the sender's SPEAKER IN.
DO NOT connect both cables to the sender's AUDIO IN and
SPEAKER IN.
3. Connect the AC power cord's female plug end into AC IN, and
then plug the AC cord's other end into a standard AC outlet.
4. Turn on the audio source, and then press the POWER button on
your sender.
Your sender's Audio Input Level Lo/Hi is preset to Lo. If you hear
volume distortion, adjust the Audio Input Level Lo/Hi to Hi.
1. Split apart about 4 inches (10.16 cm) of speaker wire on
each end. Then use a wire stripper to strip
of insulation from each wire's end.
2. Connect one end of the wire to SPEAKER OUT on the
Amplifi ed Receiver / Speaker. (Be sure to match the
polarity of the wires when making your connection.)
3. Connect the other end to the satellite speaker. Be sure to
correctly match polarity.
4. Insert the AC power cord's female plug end into the
receiver/speaker's AC IN jack, and then plug the AC cord's
other end into a standard AC outlet.
Speaker Setting
s
• The default setting for your amplifi ed speaker is stereo (S). If you connect two pairs of the 40-1462, you must set one to left (L)
and one to right (R).
• If you use a single Amplifi ed Receiver / Speaker, set LRMS to mono (M).
Speaker Out
1. Power off all system devices before making any connections.
2. Connect a matching set of speakers (8 ohms) to the Amplifi er /
Receiver's SPEAKER OUT.
Or, connect stereo audio cables from the Amplifi er / Receiver's LINE
OUT to the line level inputs on your A/V receiver. (Match LEFT to L and
RIGHT to R).
3. Insert the AC power cord's female plug end into the Amplifi er /
Receiver's POWER jack, and then plug the AC cord's other end into a
standard AC outlet.
BASS
TREBLE
AUDIO IN
SPEAKER IN
Audio Input
Level Lo/Hi
Sender Rear View
SPEAKER OUT
L R M S
AC IN
1
/
in. (1.27 cm)
2
Sattelite Speaker's Rear
View
Amplifi ed Receiver / Speaker's Rear View
LINE OUT
SPEAKER OUT
Amplifi er / Receiver Rear View
AC IN
POWER

Advertisement

loading

Summary of Contents for Accurian ACCURIAN 15-1937

  • Page 1 Thank you for buying the RadioShack Networked Home Entertainment System. Now you can send high-quality digital stereo audio to any room in your home that has an AC outlet, without running cable. This system uses the existing AC electrical wiring in your home to send digital signals.
  • Page 2 1. Rotate VOLUME on each receiver counterclockwise to adjust the How does the system send audio without wires? The sender converts the audio signal to a 4.3 – 20.9MHz carrier frequency, volume to its lowest sound level. then sends it through your home power line to a receiver that converts it 2.

This manual is also suitable for:

Accurian 15-1938Accurian 40-146215-193840-146215-1937