Download Print this page

Advertisement

Quick Links

Made in Italy
Q5 AS-OP-S-SM45-SP_IM_ENG - Rev.13 of 16/09/16
Pic. 1
A
Pic. 3
Pic. 5
Suggested height of installation
Model
Power [W]
100W
150W
250W
400W
B
H min [m]
H max [m]
7
12
7
13
7
14
8
18
MOUNTING AND MAINTENANCE
INSTRUCTION
Pic. 2
C
Pic. 4
Luminaire version
Q3 PRO 70W SHP
Q3 PRO 100W SHP
Q3 PRO 150W SHP
Q5 PRO 250W SHP
H
Q5 PRO 400W SHP
Q3 PRO 35W MHL
Q3 PRO 70W MHL
Q3 PRO 100W MHL
Q3 PRO 150W MHL
Q5 PRO 250W MHL
Q5 PRO 400W MHL
AS - OP - S - SM45 - SP
MOUNTING AND MAINTENANCE
The system connection, on pole/bracket or
on wall mounting, allows to install the
luminaire parallel to the ground. See related
section for particular fixing on pole, bracket
or wall mounting.
To gain access to the electrical parts, unlock
and open the frame [Pic. 1]. The lower
frame will open and stopping in vertical
position [Pic. 2].
To connect the luminaire to the electrical
line, insert the cable into the cable clamp
and then connect it to the on-load switch.
Tighten the cable clamp with an adjustable
wrench of:
- Q5 QUADRO: 28 mm - 10Nm
- Q5 PRO:
24mm - 7.5Nm
The feeding of the fitting must be done with
a bipolar cable with diameter between:
- Q5 QUADRO: 7 ÷ 10,5mm with standard
gasket;
9
÷
appropriate gasket.
- Q5 PRO:
8 ÷ 13mm
When it is necessary, you can take away the
gear tray, loosen the two screws (A-B) and
disconnect the main and lamp connectors
(C) [Pic. 3-4].
To reinsert the gear tray, put it in right
position and then tighten the screws and
reinsert the connectors.
ATTENTION, high voltage danger with RX7
and FC2 lamp holder.
INFORMATION TO THE CUSTOMERS
Directive 2002/96/EC (Waste Electrical and
Electronic
Equipment
information for users.
This product complies with EU Directive 2002/95/EC.
The crossed-out wastebasket symbol on the appliance
means that at the end of its useful lifespan, the product must
be disposed of separately from ordinary household wastes.
The user is responsible for delivering the appliance to an
appropriate collection facility at the end of its useful lifespan.
Appropriate
separate
collection
treatment and environmentally compatible disposal helps
prevent negative impact on the environment and human
health and promotes recycling of the materials making up
the product. For more information on available collection
facilities, contact your local waste collection service.
Incoming cables
2x1,5
2x1,5
2x1,5
2x2,5
2x2,5
2x1,5
2x1,5
2x1,5
2x1,5
2x2,5
2x2,5
Pag. 1 of 4
13mm
with
the
-
WEEE):
to
permit
recycling,
Max luminaire in
cascade
25
18
12
12
7
47
24
18
12
12
7

Advertisement

loading

Summary of Contents for AEC Q5 Pro

  • Page 1 2x1,5 Q3 PRO 70W SHP 2x1,5 Q3 PRO 100W SHP Pic. 5 2x1,5 Q3 PRO 150W SHP 2x2,5 Q5 PRO 250W SHP 2x2,5 Q5 PRO 400W SHP Suggested height of installation 2x1,5 Q3 PRO 35W MHL Model Power [W] H min [m]...
  • Page 2 MOUNTING AND MAINTENANCE INSTRUCTION Made in Italy AS - OP - S - SM45 - SP Q5 AS-OP-S-SM45-SP_IM_ENG - Rev.13 of 16/09/16 Pag. 2 of 4 Post top and bracket mounting Dimensions Mounting Mount the bracket to the pole through the 4 8MA x 100 screws (A). Tighten the 4 screws (A) with a set screw wrench of 6mm applying a twisting moment of 8Nm.
  • Page 3 Luminaires for Metal Halide lamps must be always complete with its protective screen. For luminaires with Metal Halide lamps, damaged protective shields can only be replaced with original AEC Illuminazione’s replacement shields. On luminaires for Metal Halide lamps use only UV Stop protected lamps.
  • Page 4 MOUNTING AND MAINTENANCE INSTRUCTION Made in Italy AS - OP - S - SM45 - SP Q5 AS-OP-S-SM45-SP_IM_ENG - Rev.13 of 16/09/16 Pag. 4 of 4 OPTIC ATTACHMENT LAMP AS45 / AS65 100W MHL-E AS45 / AS65 150W MHL-E SM45/S AS45/AS65 AS45 / AS65 100W MHL-T...

This manual is also suitable for:

Q5 quadro