Download Print this page

Inaxsys SW1210-16CB Product Installation Document

Switching power supply

Advertisement

Quick Links

1. Overview:
The Inaxsys SW1210-16CB switching power supply/distribution unit converts 120VAC input into 12VDC
at 11 amps of continuous supply current. The built-in 16-output distribution board allows for power
delivery across multiple outputs while offering electronically fused protection on each circuit. This general-
purpose power supply has a wide range of applications for access control, security and CCTV systems
that require additional power. For convenient installation, the unit comes completely assembled with a
compact steel enclosure, power cord and all connecting hardware.
2. Features:
Designed for quick installation
Individually protected, electronically fused outputs
Built in battery backup/charger on selected models(see below)
Short circuit isolation technology for uninterrupted operation
Class 2, Power limited outputs
Removable output terminal blocks for quick installation
Diagnostic LEDs for quick troubleshooting
Automatic switch over to stand-by battery
AC line cord included
Lifetime warranty
3. Specifications:
 UL listed to UL-60950 Information Technology Equipment.
 CE/LVD EN60950-1
 CE/EMC:EN55022,EN55024
 FCC PART 15, ICES 003-2012
● Maximum temperature range:-20° C to 40° C; (For indoor use only.)
● Relative humidity: 20% ~ 90%
 85% of Efficiency with full load.
 Maximum ripple 150mVp-p, Maximum noise 200mVp-p
 Built-in charger for sealed lead acid battery.
 Individual outputs current limited at 2.5 Amps per circuit.
 Maximum battery charge 500mA (Subtract from total output).
 Red LED's indicate DC power presence on each circuit.
Products
SW1205-4CB
12VDC@5.5 Amps
SW1205-8CB
12VDC@5.5 Amps
SW1210-8CB
12VDC@11 Amps
SW1210-16CB
12VDC@11 Amps
Note: When using the battery charger for backup /charging, 500mA needs to be subtracted from the total
output power listed above in table.
Power output
Number of
Battery
outputs
Charger
4
Yes
8
Yes
8
Yes
16
Yes
SW1210-16CB
Enclosure dimensions
9.25". x 8.25" in. x 3.5"
(23.3 cm x 21 cm x 9 cm)
9.25". x 8.25" in. x 3.5"
(23.3 cm x 21 cm x 9 cm)
17"L x 13.5"W x 4.75"H
(43.2 cm x 34.3cm x 12.06 cm)
17"L x 13.5"W x 4.75"H
(43.2 cm x 34.3cm x 12.06 cm)

Advertisement

loading

Summary of Contents for Inaxsys SW1210-16CB

  • Page 1 SW1210-16CB 1. Overview: The Inaxsys SW1210-16CB switching power supply/distribution unit converts 120VAC input into 12VDC at 11 amps of continuous supply current. The built-in 16-output distribution board allows for power delivery across multiple outputs while offering electronically fused protection on each circuit. This general- purpose power supply has a wide range of applications for access control, security and CCTV systems that require additional power.
  • Page 2 650mA 2.5Amps SW1210-8CB 2.6Amps 1.3Amps 2.5Amps SW1210-16CB 2.6Amps 1.3Amps 2.5Amps Equipment is to be installed and serviced by authorized / trained personnel only. Installation should conform to all local codes and in accordance with the National Electrical Code. Shut branch circuit power before installing / servicing equipment.
  • Page 3 5. Maintenance/Troubleshooting Product should be tested annually for proper functionality. Normal verification of proper operation includes measuring all outputs with a voltmeter under normal load conditions to ensure output voltage is present. Trouble shooting tips: Symptom Check for  All output LEDs are extinguished Measure for proper input voltage (120VAC/240VAC) using an AC voltmeter.
  • Page 4 SW1210-16CB Power Module 1: Output Terminal Block for circuits 1-4 and Voltage Adjustment Power Module 1: Output Terminal Block for circuits 5-8 and Voltage Adjustment Power Module 2: Output Terminal Block for circuits 1-4 and Voltage Adjustment Power Module 2: Output...

This manual is also suitable for:

Sw1205-4cbSw1210-8cbSw1205-8cb