Summary of Contents for JC MACHINERY & TOOLS INC. JC-1600-JMR
- Page 1 JC MACHINERY & TOOLS INC. Quality We Trust Plastic Extrusion Welder JC-1600-JMR / JC-3400-JMM User Manual JC-1600-JMR JC-3400-JMM _____________________________________________________________________ www.jc-tool.com info@jc-tool.com...
- Page 2 JC MACHINERY & TOOLS INC. Quality We Trust Product Overview Extruding plastic gun is a new type of hot air welder which is imported foreign advanced technology, well-developed. The major components (hot air gun and drive motor) are made of imported brand-name accessories, stable performance, long service life;...
- Page 3 JC MACHINERY & TOOLS INC. Quality We Trust Main Technical Parameters JC-1600-JMR High Power Hand Extruder Model JC-1600-JMR Voltage 230 V Frequency 50 / 60 Hz HITACHI Extruding Power 800 W Hot Air Power 1600W Welding Rod Heating Power 800W 20 - 600 ℃...
- Page 4 JC MACHINERY & TOOLS INC. Quality We Trust Appearance and Components （ JC-3400-JMM for Example ） iii. Operation Procedures 1) Put the welding gun on the shelf, install the handle, plug in the mains plug. 2) Open the control box switch, welding temperature is generally set at 300 ℃ (572 ℉...
- Page 5 JC MACHINERY & TOOLS INC. Quality We Trust 5) Motor’s rotating speed is fast without thermoplastic and will become heavier when sending welding rod, if become very difficult, please stop, probably screw heating time is too short or low temperature. 6) Different welding methods require different welding nozzles, our company provides a standard nozzle.
- Page 6 JC MACHINERY & TOOLS INC. Quality We Trust 2) Light weight, easy to handle and available to operation at different angles. 3) Big extrusion volume can be welded more than 10mm welding seam. 4) Different welding shoes can be applied to different types of welding. 5) It is used in the tank and pipe and complies with Part 4 of the DVS standard (Germany Welding Association).
- Page 7 JC MACHINERY & TOOLS INC. Quality We Trust 2) Stop using the equipment or start using must ensure that the head nozzle is not covered with plastic, and if so may result in poor extrusion, resulting in a backflow or injection, reflux causes the damage, spray may cause burns.