Advertisement
Quick Links
For The ON-THE-GO Pet
™
INSTRUCTION MANUAL
ROADSTER PET STROLLER
PG8600BOB/PG8600BPK
AT
Interior Dimensions:
33L x 20W x 21H
To see our full line of products, visit us online at: www.petgearinc.com
CUSTOMER SERVICE HELP DESK
customerservice@petgearinc.com
Toll-Free 877-752-9123 - Eastern Standard Time 8am-3pm, Monday through Friday
Advertisement
Related Manuals for PetGear PG8600BOB
Summary of Contents for PetGear PG8600BOB
- Page 1 For The ON-THE-GO Pet ™ INSTRUCTION MANUAL ROADSTER PET STROLLER PG8600BOB/PG8600BPK Interior Dimensions: 33L x 20W x 21H To see our full line of products, visit us online at: www.petgearinc.com CUSTOMER SERVICE HELP DESK customerservice@petgearinc.com Toll-Free 877-752-9123 - Eastern Standard Time 8am-3pm, Monday through Friday...
-
Page 2: Parts List
Figure A. Step 2. Push in axel until it clicks. Step 3. Pull on wheel to make sure the wheel is engaged. Repeat on other side. When finished it should look like Figure B. ROADSTER PET STROLLER • PG8600BOB/PG8600BPK... - Page 3 To remove Pull up to make sure wheels are locked. axel press on velco button. Step 5. Place stroller so wheels are on the ground and back wheels are facing you (shown in Figure E). ROADSTER PET STROLLER • PG8600BOB/PG8600BPK...
- Page 4 Choose height level (1 or 2), then release Velco Pin velco pins. Pull up on handle to make sure it is securely locked. This is shown in Figure G. ROADSTER PET STROLLER • PG8600BOB/PG8600BPK...
- Page 5 FRONT WHEEL ASSEMBLY INSTRUCTIONS Step 1. To attach front wheel, slide plastic wheel support Step 2. Slide wheel up, until velco pins pop out up and into tubing. of holes. Velco Pin Velco Pin Tubing Tubing Step 3. To use stroller in locked position for jogging, Step 4.
- Page 6 Step 2. Pull support bar up to release and continue to Step 1. Remove handlebar, by pushing velco pins in to release. swing the bar counter-clockwise. Pull handlebar up and off. Velco Step 3. Fold sides inward, until flat. ROADSTER PET STROLLER • PG8600BOB/PG8600BPK...
-
Page 7: Wheel Maintenance
• Push stroller back and forth and rotate swivels around to work in lubricant. • Clean the rear wheel assembly and the rest of the frame with warm, soapy water; clean off with warm water and dry thoroughly. • NOTE: Do not lubricate brake components or swivel locks. ROADSTER PET STROLLER • PG8600BOB/PG8600BPK... -
Page 8: Replacement Parts
• Any goods carried in the basket not to exceed 6 lbs. REPLACEMENT PARTS Use only PET GEAR replacement parts. Please have your model number ready before calling. You can also request parts: http://www.petgearinc.com/main.asp?sel=2 PO Box 99∙West Rutland, VT∙05777∙877-752-9123∙www.petgearinc.com ROADSTER PET STROLLER • PG8600BOB/PG8600BPK...