Advertisement
Quick Links
INTRODUCTION
Congratulations on the acquisition of Magic light easel!
The exterior might be slightly different from that shown in the instruction.
Please read the instruction carefully and save it before using your Magic light easel (MLE).
TECHNICAL PARAMETERS
Power:
Network voltage:
Voltage used by ML:
Current flow:
Electrical frequency:
Remarks:
1. Easel is made in a way, that you could take out the glass from wooden part, rinse the glass with cool
water, mop it and put in again. It is forbidden to immerse wooden part in water or other fluids, to pour
fluids on it!
2. When lifting the easel, hold the wooden part from underneath.
3. The use of MLE, at a temperature close to limit, reduce radiated light flow and shortens operating
time of the product.
CONNECTION:
Before connecting make sure, that the device has no damages.
Needed parts in order the device would function: the MLE itself (A), 12 V adapter (B), remote control (C) and
electric power source. The easel consists from three parts: special glass (A.1), wooden base (A.2) and wooden
legs set with screws and spanner (A.3).
Open the package and take out the glass (A.1) from wooden base (A.2). Fix the legs (A.3) to the bottom of
the base (A.2) using screws and spanner. Then place the glass (A.1) to the wooden base (A.2) again.
14,4 W
Temperature regime:
~ 220 V
Relative humidity in the room:
= 12 V
Weight:
0,6 A
Measurements:
50 Hz
MAGIC LIGHT EASEL
USER MANUAL
+10°C - +45°C
80 %
4 kg
55,7 x 46,7 cm
Advertisement
Summary of Contents for JonEly MAGIC LIGHT
- Page 1 INTRODUCTION Congratulations on the acquisition of Magic light easel! The exterior might be slightly different from that shown in the instruction. Please read the instruction carefully and save it before using your Magic light easel (MLE). TECHNICAL PARAMETERS Power: 14,4 W Temperature regime: +10°C - +45°C...
- Page 2 To switch on the ML easel, connect it as indicated in chapter “Connection”. Then point the remote control eye (it is at the top of the remote) to the Jonely sign at the right side of MLE wooden base and p u s h the button...
- Page 3 Glass decoration paint, Advices: On Magic light easel you can draw from both sides. To make it more interesting – ask your family members or friends to join you. The painting will become unpredictable and the process of such creation you will remember for a long time.
- Page 4 After you have finished using MLE, point the remote-control eye (it is at the top of the remote) to the Jonely sign at the left side of MLE wooden base and push the button OFF. Then disconnect adapter (B) from electric power source and the ML easel (A) and put the Magic light easel to the place, appointed for it.