Wintec Ego WBC 300 Plus Instruction Manual

PK CA01 VER.1
WBC 300 Plus
2.4GHz ANT+ Wireless Bike Computer
Instruction Manual
Design Patented
Overview
Function key
‧
Press the button to switch and look through the cycling information on
information page.
‧
In the setting mode, press the button to change numbers or measurement units.
‧
When entering the altitude adjustment, press the button to switch among three
types of adjustment or the numbers.
Backlight / Heart Rate / Switch key
‧
On the information page, press the button can enable the backlight, and the
backlight stays on 5 seconds before turning off.
‧
On the information page, press the button longer to turn the heart rate function
On or OFF.
‧
In the setting mode, press the button to shift the selected parts on numbers or
units.
‧
When entering the altitude adjustment, press the button to shift the selected
parts on the screen.
Setting Button
‧
In the information status, press and hold the setting button on the back for 3
seconds to enter the setting mode.
‧
In the setting mode, press the button shortly to scroll over the setting functions.
‧
In the setting mode, press and hold the setting button on 3 seconds again to
return to the information page.
Wheel Size (Reference Chart)
Tire Size Tire Size Tire Size
L (mm) L (mm) L (mm)
12 x 1.75 935 26 x 7/8 1920 27 x 1-1/4 2161
14 x 1.5 1020 26 x 1(59) 1913 27 x 1-3/8 2169
14 x 1.75 1055 26 x 1(65) 1952 650 x 35A 2090
16 x 1.5 1185 26 x 1.25 1953 650 x 38A 2125
16 x 1.75 1195 26 x 1-1/8 1970 650 x 38B 2105
18 x 1.5 1340 26 x 1-3/8 2068 700 x 18C 2070
18 x 1.75 1350 26 x 1-1/2 2100 700 x 19C 2080
20 x 1.75 1515 26 x 1.40 2005 700 x 20C 2086
20 x 1-3/8 1615 26 x 1.50 2010 700 x 23C 2096
22 x 1-3/8 1770 26 x 1.75 2023 700 x 25C 2105
22 x 1-1/2 1785 26 x 1.95 2050 700 x 28C 2136
24 x 1 1753 26 x 2.00 2055 700 x 30C 2170
24 x 3/4 Tubular 1785 26 x 2.10 2068 700 x 32C 2155
24 x 1-1/8 1795 26 x 2.125 2070 700C Tubular 2130
24 x 1-1/4 1905 26 x 2.35 2083 700 x 35C 2168
24 x 1.75 1890 26 x 3.00 2170 700 x 38C 2180
24 x 2.00 1925 27 x 1 2145 700 x 40C 2200
24 x 2.125 1965 27 x 1-1/8 2155
Note: To measure accurate tire size, please refer to the following ways per
instructions.
1. Spin the wheel and choose one piece
of the spoke or let the valve stem
vertically straight to the ground to be
A point marked on the surface of
ground.
2. Then spin the wheel in one circle and
when the same piece of spoke or the
valve stem reaches to the ground
again, mark the position of it as B
point on the ground.
3. Measure the distance between point
A and B (mm) to acquire the wheel
A B
size for setting.
Bike Info
CLOCK
Display the time in 12-hours or 24-hours clock.
CADANCE
The current RPM value. (0~199)
HEART RATE
Indicate the present heart rate value. (0~199)
3
MOVE TIME
Measure the time on riding from the reset on measured value since last
time. (00:00~99:99)
CADANCE
The current RPM value. (0~199)
HEART RATE
3
Indicate the present heart rate value. (0~199)
AVG . SPEED
Measure average speed calculated from the total distance divided with
time on riding. (0~9999.9)
AVERAGE CADANCE
Record data on the value of average cadence from the last clearance on
2
the record.(0~199)
AVG. HEART RATE
Measure the average heart rate from the latest reset on measured value.
MAX SPEED
Measure the fastest speed from the reset on measured value since last
time. (0~9999.9)
The FASTEST CADENCE
Record data on the value of fatest cadence from the last clearance on the
4
record.(0~199)
MAX. HEART RATE
Record data on the value of fatest cadence from the last clearance on the
record. (0~199)
ALTITUDE
The indication on the present altitude. The present altitude is calculated
based on the barometer. Even at the same position, the altitude may
have a little discrepancy due to the different conditions on the weather.
Even when in a stable weather condition, the same position of altitude
3
may differ in 20 meters from daytime to nighttime. (-999~19999)
CADANCE
The current RPM value. (0~199)
HEART RATE
Indicate the present heart rate value. (0~199)
GRADE(SLOPE)
Slope shows the percentage of the current value of the slope. Slope is
calculated by the change in height and distance, There might be
temporarily a slight discrepancy and delays occurred especially at low or
rapid change on speed. (-99~99)
3
CADANCE
The current RPM value. (0~199)
HEART RATE
Indicate the present heart rate value. (0~199)
MAX. ALT
Measure the highest altitude from the latest reset on measured value.
(0~19999)
CADANCE
The current RPM value. (0~199)
HEART RATE
3
Indicate the present heart rate value. (0~199)
TOT.ALT
Measure the grand total of ascent altitude from the latest reset on
measured value. (0~19999)
CADANCE
The current RPM value. (0~199)
HEART RATE
3
Indicate the present heart rate value. (0~199)
DISTANCE
Measure the distance on riding since the reset on measured value last
time.(0~9999.99)
CADANCE
The current RPM value. (0~199)
HEART RATE
3
Indicate the present heart rate value. (0~199)
ODOMETER
When resetting the odometer, the data won't return to zero, you need to
change the value of it in the setting mode. (0~9999.99)
CADANCE
The current RPM value. (0~199)
HEART RATE
3
Indicate the present heart rate value. (0~199)
TEMP
To indicate the present degree on temperature. (0~199)
CADANCE
The current RPM value. (0~199)
HEART RATE
Indicate the present heart rate value. (0~199)
3
CALORIES
Measure the amount of calories consumption from the reset on measured
value since last time.(0~19999)
CADANCE
The current RPM value. (0~199)
HEART RATE
3
Indicate the present heart rate value. (0~199)
The heart rate zone is calculated automatically by
the age set on the computer. (We recommend
Auto Scroll that the proper status is to keep in zone 2 to 3
when cycling)
The unit will scroll
EX: If your age is 30.
and change to next
HR ≧ 220 - age = 190 BPM
information page
HR ≧ 190 x 0.9 = 171 BPM
automatically per 5
3
HR ≧ 190 x 0.8 = 152 BPM
minutes.
HR ≧ 190 x 0.7 = 133 BPM
HR ≧ 190 x 0.6 = 114 BPM
The "up" arrow on the screen displays the present speed is higher than
the average speed. On the other hand, the "down" arrow on the screen
displays the present speed is lower than the average speed.
The up symbol above the RPM indicates the current average rate is
higher than average rate of cadence. On the contrary, when the arrow is
facing down, the current average rate is lower than average rate of
5 5
cadence.
The "up" arrow on the screen displays the present heart rate
is higher than the average one. On the other hand, the "down" arrow on
the screen displays the present heart rate is lower than the average one.
Operating the Unit
Data Reset
Press function key for 3 secs can clear the present data back to Zero execpt the
altitude adjustment. For the altitude adjustment, please refer to the operation of
Altitude adjustment Mode.
Power Saving Mode
If the main unit does not receive a signal or when keypads or sensor do not triggered
after about 10 minutes, the main unit enters power saving mode and only displays
the time info.
Auto Start / Stop
Under the power saving mode, press function key can wake up the information
page.
LCD Contrast Adjustment
LCD contrast can be adjusted when the battery is installed on the unit. In the
meantime, all the icons will show up on the display by 3secs, in the meantine, press
function key(darker) or Backlight/Switch key(lighter) any of it to make adjustment .
If the setting is done, press setting Button to exist.
Speed/Cadence Sensor Pairing
The product supports ANT + speed and cadence sensor. If we need to re-pair it,
please enter the setting mode. Set the mode to the system in SC.SCAN to perform
the pairing. Since this product supports two bikes recording in A or B , you can select
one of it, and pair the speed and cadence sensor, the system will record the sensor
ID paired in A or B bike respectively, When you choose A or B mode, the system will
imported the related sensor ID automatically.
*Before performing the paring of speed/cadence sensor, please make sure the battery
has been installed and be sure to roll the magnet over the detection zone on the
sensor in advance in order to activate it successfully.
Enable the Heart Rate Sensor
To enable the heart rate sensor, please switch to the information page, press the
backlight/heart rate/switch key to enable or disable the heart rate sensor. (When there
is the icon " " shown on the screen means the sensor is on, if the icon " "
disappeared means the sensor is turned off.
If the unit cannot detect the value of heart rate for 1 min, it will close down the heart
rate function.
Pairing the Heart Rate Sensor with Unit
The product supports ANT + heart rate sensor.
Please enter the setting mode. Set the mode in HR.SCAN to perform
the pairing process. Please make sure the battery has been installed in the sensor
and wearing on the right position before starting up the pairing progress.
Altitude Adjustment
Under the information browsing page, if any of it contains the altitude related info(like
MAX.ALT, TOT ALT, GRADE), in the meantime, press function key 1 for about 3 secs
to enter the altitude adjustment mode. After the setting is done, press the function key
for 3secs again to return to the informatin page.
There are three selections for altitude adjustment.
1 ADJUST: Adjust and input the altitude manually according to any operating
environment like riding along seacoast or mountain riding. The height can be acquired
on the positions.
2 Home: Adjust and input the altitude manually according to the default altitude at
home.
3 Default: Calculation on altitude according to the factory default.
Setting Mode
Enter / Return to the Press and hold the setting button on the back for 3 seconds
information page,
to enter the clock setting mode. Return to the information page,
press and hold the
press and hold the button for 3 seconds again.
button for 3 seconds. Clock Setting
Function key: Select time in 12-hours or 24-hours clock or
set the time in lower line.
Backlight/Heart Rate/Switch key: To shift the selected
Clock Setting
parts between 12-hours or 24-hours clock or time setting.
Setting Button: Store the setting value and go to the next
selection for clock or time setting.
KMH / MPH Setting
KMH/ MPH
Setting
Function key: Select the indication on KMH or MPH unit.
Setting Button: Store the setting value and go to the next
selection for tire size setting.
A or B bike
A or B bike
Function key: Select the bike A or B.
Setting Button: Store the setting value and go to the next
selection for tire size setting.
Setting on Tire Size
Setting on
Tire Size
Function key: Change the numbers of length.
Backlight/Heart Rate/Switch key: Shift the selected parts
on numbers.
Setting on
Setting Button: Store the setting value and go to the next
Age
selection for odometer setting.
Setting on Age
Function key: Change the numbers of Age.
Odometer
Backlight/Heart Rate/Switch key: Shift the selected parts
Setting
on numbers.
Setting Button: Store the setting value and go to the
nextselection for Odometer setting.
Speed/Cadence Odometer Setting
Sensor Pairing
Function key: Change the numbers of odometer.
Backlight/Heart Rate/Switch key: Shift the selected parts on
numbers.
Pairing on Heart
Setting Button: Store the setting value and go to the next
Rate Sensor
selection for speed/cadence sensor pairing page.
Speed/Cadence Sensor Pairing
Function key: Perform the pairing on speed sensor and return to the
information page
Setting Button: Go to the pairing on heart rate sensor setting page.
*Before performing the paring of speed/cadence sensor, please make sure the battery
has been installed and be sure to roll the magnet over the detection zone on the
sensor in advance in order to activate it successfully.
Pairing on Heart Rate Sensor
Function key: perform the pairing on heart rate sensor and return to the
information page.
Setting Button: go to the clock setting page.
*Before performing the paring of sensor, please make sure the battery has been
installed and be sure to wear the sensor on the correct position in order to activate it
successfully.
Installing the Unit
Rubber Holder Bracket Rubber Holder
Speed/Cadence
for Speed Sensor
Sensor
Heart Rate Sensor Cadence Magnet Magnet Strap
How to Install the Bracket
straps in normal size
Install the Bike Computer
Install the bike computer on the A. handle bar or B. stem
A. B.
*Please make sure the unit has been well-clicked into the bracket.
Installing on Magnet of Speed Sensor
1. Please remove any dirty or oily things on the spoke to make sure no slipperiness
before installing magnet.
2. Release the safety hook on the magnet.
3. Be sure to clip it on the spoke tightly into the most inner side of gap on the central
of two-sided magnet．
4. Lock the safety hook back on magnet in order to avoid it being thrown off in cycling.
Please clip the magnet for
speed sensor on the spoke,
place the spoke into the bottom
side of crack.
Installing Cadence Magnet
1. Please place the cadence magnet into silicone band.
2. Please penetrate the wider strap into the the silicone band to prevent the cadence
magnet fallen off.
3. Please measure and circle the silicone band on the crank to measure the most
proper in length and cut the extra unnecessary pars of band off by a scissor.
4. Finally, fix the position of silicone band by the strap.
Installing on the Speed/Cadence Sensor
Assemble the rubber desk with sensor. ( → → )
1. A B C
2. Please parallel detection zone on the sensor to the central surface on magnet.
3. Measure the appropriate length of rubber desk when tie it up on the frame of bike
with the straps and cut the additional parts off.
C
A
B
thin straps
Speed
Magnet
5mm
Cadence
Detection zone
Magnet
5mm
Speed sensor can be adjusted in
180 degree rotation in align for the
detection on the magnet.
3
1Cadence Magnet 2
2Speed/Cadence Sensor
3Speed Magnet 1
Wearing on the Heart Rate Sensor
1. Adjust the Heart Rate straps to the most appropriate
length and fit to the chest size.
2. Insert the HR strap hook into the two sides of holes, and
press it until it fixed on the rubber.
3. Place the detection zone near the area of the heart on
the skin, and keep the "Wintec" logo side as the front
side when wearing on the chest.
‧
To avoid measurement errors, it is recommended to moisten the chest with water.
‧ If there is any discomfort or allergy occurred, please remove it immediately.
‧
If the sensor cannot be detected, please repairing the unit again or check the battery capacity.
‧ For the cleanness of the heart rate monitor, you can clean it with towel in wet.
Replacement of Battery
+
CR2032
+
CR1632
+
CR2032
When there is a low-power icon
appearing on the screen, please
replace it with a new battery as soon
as possible.
Maintenance
For cleanness of the unit or accessories, moisten a soft clothe in and diluted neutral
detergent and wipe it clean and dry with another towel.
Specification
16-bit 1-chip (Crystal controlled oscillator)
Microcomputer
Battery Bike Computer: 3Volt Lithium Battery CR2032 x 1
Speed/Cadence Sensor: 3Volt Lithium Battery CR1632 X1
Heart Rate Sensor: 3Volt Lithium Battery CR2032 x 1
Battery life Bike computer: Approx. 10 months, calculated based on
1-hour consumption per day and depending on the extent on
the usage.
Speed/Cadence Sensor: Approx.12 months, calculated
based on 1-hour consumption per day and depending on the
extent on the usage.
Heart Rate Sensor: Approx. 12months, calculated based on
1-hour consumption per day and will be more or less
depending on the extent on the usage.
*Please be aware that the frequent use on the backlight in
operation will lead to faster power consumption.
Display Liquid crystal display
Tire peripheral lengths from 0 to 9999 cm
Tire Sizes
(Initial value: 2096 mm)
0 °C – 40 °C (Please be aware that if the temperature is over
Working
Temperature high or low, it may result in a system delay or LCD turns
dark.)
Bike Computer: 54 x 35 x 12mm
Dimension
Speed/Cadence Sensor: 62 x 24 x 12 mm
Heart Rate Sensor: 354 x 33 x 12 mm
Bike Computer: 21g
Weight
Speed/Cadence Sensor: 11g
Heart Rate Sensor: 48g
* The life of the factory-loaded battery might be shorter than the description in usage.
* The specifications and design are subject to change without notice.
Trouble Shooting
No Display
(1) Check the battery capacities and it will be in low efficiency when in the cold
season.
(2) If the battery installed upside down?
(3) Make sure the battery case locked on the unit.
No Speed info
(1) Check if there are some dust inside the contacts on bracket or on the unit.
(2) Make sure the distances between sensors and magnet is within 5mm.
Not Correct Value on Speed and Distance
(1) Make sure the correct value setting on tire peripheral.
(2) Make sure the distances between sensors and magnet is within 5mm.
(3) Unload the battery and install again.
The screen becomes dark
Check if there is high temperature in environment.
The screen becomes dim
Check if the power of battery is low.
System Delay
(1) Check if there is over low temperature in environment.
(2) Check if the power of battery is low.
The inaccuracy on the altitude
The present altitude is calculated based on the barometer, even at the same
position, the altitude may have a little discrepancy due to the different conditions on
the weather. Even when in a stable weather condition, the same position of
altitude may differ in 20 meters from daytime to nighttime The longer you are using
the computer may lead to larger discrepancy. We suggest to manually input the
present altitude when inaccuracy.
Pair the sensor failed
(1) Check if the sensor is in low power status.
(2) Check if it is connected and paired successfully with the computer.
(3) Check if the speed/cadence sensor is on the correct positon.
(4) Check if the heart rate sensor is on the correct positon.
(5) Check whether the heart rate function is enabled on the computer.
Notice
Please read through instructions carefully before attempting to install WBC-300+.
Keep the manual at a place easily accessiable, and do not throw away.
‧ Do not concentrate on the computer operations while bicycling. Always be sure to bicycling safety.
‧
Please check the distance between magnet and sensor within 5mm periodically.
‧ Never disassemble the main unit.
‧
Do not leave the main unit directly exposed to sunlight.
‧
Periodical check the positions on the magnet, sensors and bracket.
‧ This bicycle computer only supports ANT + speed / cadence sensor and ANT + heart rate sensor, it
does not support ANT + speed sensor, ANT + cadence sensor and other ANT + related accessories.
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant
to part 15 of the FCC rules. These limits are designed to provide to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the installation, may cause
harmful interference to radio communication. However, there is no guarantee that interference
will not occur in a particular installation. if this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Increase the separation between the equipment and receiver
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
-Consult the dealer or an experienced radio / TV technician for help
You are cautioned that changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions
(1) This device may not cause harmful interference and
(2) this device must accept any interference received, including interference that may cause undesired
operation.