Summary of Contents for SONIQ QMS100
- Page 2 Important Notes 1 2 3 6 7 8 9 13 14 15 This safety and operating instruction should be retained for future reference. Avoid installing the unit in locations described below: - Places exposed to direct sunlight or close to heat radiating Appliances such as electric heaters.
- Page 3 OPERATING THE UNIT 1 : indicates when RANDOM is selected in USB or SD/MMC mode 2 : indicates when select Random in SD/MMC mode if USB and SD/MMC When you plug the unit into the AC socket firstly, the unit will be in devices are both inserted standby mode, the LCD will show the time and day.
- Page 4 - Copy all files of a device Clock and Alarm Functions : Press [TRANSFER] key in stop mode, and LCD will indicate as the following sequence: Clock and Day setting : - In standby mode, you are able to set the clock. Track X X X - Press the [...
- Page 5 Alarm Enable and Disable - Press the Al1 key to enable (with alarm icon is shown) - Press the Al1 key to disable (without alarm icon is shown) - When alarm is arrived: (i) Press [SNOOZE] key to stop alarm temporarily, alarm will turn on 9 minutes later.