Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for intensity IFCH306KF-1
- Page 1 FAN & COIL UNIT 1, 1.5 Tons. IFCH304KF-1, IFCH306KF-1, IFCH308KF-1. OWNER´S INSTALLATION MANUAL Thank you very much for purchasing our air conditioner, Before using your air conditioner, please read this manual carefully and keep it for future reference. MAN-O-IFCH3-0615 intensity.mx...
-
Page 2: Table Of Contents
Install according to this installation instructions strictly. CONTENTS PAGE If installation is defective, it will cause water leakage, electrical shock and fire. PRECAUTIONS..................1 When installing the unit in a small room, take measures INSTALLATION INFORMATION..............2 against to keep refrigerant concentration from exceeding FUNCTIONS &... -
Page 3: Installation Information
2. INSTALLATION INFORMATION CAUTION To install properly, please read this "Owner’s & Installation manual" at first. Ground the air conditioner. Do not connect the ground wire to gas or water pipes, The air conditioner must be installed by qualified persons. lightning rod or a telephone ground wire. -
Page 4: Parts Names
6. PARTS NAMES Precautions before installation Decide the correct way of conveying the equipment. The above figures is an instance models, which would be different from the one that you purchase. Try to transport this equipment with the original package. If the air conditioner needs to be installed on a metal part of air return cabinet the building, electric insulation must be performed, and the... - Page 5 Concrete iron Embedded bolt (With embedded Gasket bolt in pipe) Pendant Pendant bolt assembly Fig.7-6 Suspending the indoor unit Fig.7-4 Use tools such as pulleys to hoist the indoor unit to the pendant bolt. New concrete roughcast Use tools such as gradienter to settle the indoor unit Set it with embedded bushes or embedded bolts.
- Page 6 Table 7-1 Model 400-Model 800-Model Size 1265 1205 1233 1205 1161 1461 1003 1303 NOTE The above figures is an instance models, which would be different from the one that you purchase. The broken lines in above figures for illustrate the dimension of air return box. (Lower side air return box and rear air return box) If you need to order air return box from us, please be specific describe which kind you need.
-
Page 7: Pipe Connection
8. PIPES CONNECTION Bend With air release valve, the other side is water inlet pipe. S-shape When connect water collecter, set the tightening torque to 6180~7540N.cm(630~770kgf.cm), and use a spanner to tighten it as shown in Figure. Fig.9-2 The diameter of connective junction in water inlet pipe and water outlet pipe is RC3/4 tapper pipe thread inside. -
Page 8: Wiring
10. WIRING CAUTION The air conditioner should use separate power supply with rated voltage. The external power supply to the air conditioner should have ground wiring, which is linked to the ground wiring of the indoor and outdoor unit. The wiring work should be done by qualified persons according to circuit drawing. an all-pole disconnection device which has at least 3mm separation distance in all pole and a residual current device(RCD)with the rating of above 10mA shall be incorporated in the fixed wiring according to the national rule.