Ceilhit S+ 06 Instructions For Use And Installation

1. Basic technical data
Type
PANEL S+ 06 *
PANEL S+ 08 *
PANEL S+ 09
PANEL S+ 12
PANEL S+ 18
PANEL S+ 24
PANEL S+ 30
PANEL S+ 36
* Version S+ Short
2. Use
Radiant panels are intended for the heating of large spaces, mainly industrial halls and workshops, etc.,
warehouses, shops, function halls and sports halls. They can also be used for the local heating of designated
areas (zonal temperature maintenance). The S+ ANTICOR model is intended for environments with an increased
risk of corrosion. The panel is constructed for use in environments with splashing water. However, rapid cooling of
the panel when it is hot can result in irreversible damage to it.
3. Installation
nstallation of these panels may only be carried out by a person with a specialized
qualification. The electrical wiring must comply with the valid norms in the country of
installation. The panels can either be hung from the ceiling on four fixtures using a chain or
cords, or with the help of installation brackets. The brackets are supplied disassembled in
the terminal and need to be attached before installation of the panel. The brackets can be
supplemented with a swivel bracket – an inclinable bracket (not part of the product
package).
Phe radiant panel can be installed at an angle as well as vertically. However it must not be
installed at an angle or vertically in such a way that the terminal is the highest part of the
panel. There is higher convection of heat when the panel is in a tilted position and this
heat would irreversibly damage the electrical compo-nents of the terminal.
Instructions for use and installation
Radiant electric heating panel: S+
Wattage Voltage
[V]
[W]
600
230/400V 3N
850
900
230 V 1N
1200
1800
2400
230/400V 3N
3000
3600
S+ ANTICOR
Protection
IP
class
I IP 44
MANI-115-01 – N664/R01 (08.06.16)
Dimensions Weight
[mm]
650 x 250 x 60
1550 x 150 x 60
1550 x 250 x 60 12,35
1550 x 350 x 60 16,65
[kg]
4,9
7,8