RCM-2 FOR YOUR FUTURE REFERENCE • This easy-to-use manual will guide you in getting the best use of your cooler. • Remember to record the model number and the serial number. This information can be found on the inside of your cooler.
4. IDW requires that a dedicated circuit be used for the unit. Failure to do so voids warranty. 5. Never unplug your cooler by pulling on the power cord. Always grasp the plug fi rmly and pull it straight out from the outlet.
• Inspect cooler for concealed damage. Immediately fi le a claim with the freight carrier if there is damage. IDW is not responsible for damage incurred during shipping. • Cooler must remain unplugged in an upright position for 1 hour prior to use.
RCM-2 Instruction Manual BEVERAGE STORAGE Accessing Compressor Compartment: Do not overload the cooler beyond the red limitation line. Using a Philips screwdriver, unscrew (2) screws at the bottom of grill. Remove the grill Leave adequate space between beverage cans to allow air circulation.
RCM-2 Instruction Manual Troubleshooting MAINTENANCE The following are NOT malfunctions: Cleaning Situation Causes • Unplug the cooler before cleaning. Liquid fl owing noise within cooler • This is the sound of the cooling agent fl owing through the pipes. • Use a soft cloth or sponge with water or soap (non-corrosive mild detergent). After cleaning, wipe the cooler using a Refrigeration system is shutdown for longer periods •...