Advertisement
Quick Links
1.
Features
1.1
Time
1.2 Temperature
1.3 Wireless Outdoor Sensor
Sensor
2. Unit Appearance
Part A:
A1: Radio Controlled Icon
A2: Time Display
USER MANUAL
- Radio Controlled Time (RC-WWVB)
- 12/24 hour time display selectable
- Daily Snooze Alarm function
- Day of week in 3 languages user selectable
- Indoor measurable range: -10°C ~+ 50°C
- Measures °C / °F user selectable
- Outdoor measurable range: -20 ~ 50°C
- 433.92 MHz RF receiving frequency
- Transmission range: 70 meters (open area)
- Low-battery indicator for Outdoor Thermo
- Wall Mount or Table Stand
A3: Indoor Temperature
A4: Date, Day of Week
Advertisement
Summary of Contents for Marathon Watch CL030027A
- Page 1 USER MANUAL Features Time - Radio Controlled Time (RC-WWVB) - 12/24 hour time display selectable - Daily Snooze Alarm function - Day of week in 3 languages user selectable 1.2 Temperature - Indoor measurable range: -10°C ~+ 50°C - Measures °C / °F user selectable - Outdoor measurable range: -20 ~ 50°C 1.3 Wireless Outdoor Sensor - 433.92 MHz RF receiving frequency...
- Page 2 B4: “+/12/24” Button B8: “ALERT” Button Part C: C1: Wall Mount Hole C3: Stand C2: Battery Compartment Outdoor Thermo Sensor(Model Name: CL030027A，CL030066A ) D1: Transmission Indication LED D5: “RESET” button D2: Temperature Display D6: “C/F” button D3: Battery Compartment D7: Stand...
- Page 3 4.2 Outdoor Thermo Sensor Battery compartment (D3) of thermo sensor is locating behind the back cover, unscrews the batteries cover to open. Insert 2 x AAA batteries observing polarity [ “+” and “–“ marks] 5. Installation 5.1 Main Unit The main unit can be placed onto any flat surface (C3), or wall mounted by the hanging hole (C1) at the back of the unit.
- Page 4 The clock automatically scans the time signal at 2.00 a.m. every day to maintain accurate timing. If reception fail, scanning stops (“ ” on LCD disappear) The clock can be set to scan the time signal manually by holding “ ”...
- Page 5 time setting. Press “+” or “-” button to adjust the alarm time. Press “MODE” button to confirm the setting. 7.4 Snooze Alarm Function: Press “ALARM” button to activate or deactivate the alarm. If the alarm is on, alarm icon " "...
- Page 6 as follow: Upper limit of temperature, Lower limit of Temperature. When it’s alert, the corresponding icon “ ” or “ ” and temperature digit would flash on the LCD. Press any buttons to stop the alert sound. 8.2 The use of Temperature Probe: Insert the probe plug to the jack on the right hand side of the thermo sensor unit.
- Page 7 interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna.