Related Manuals for J&M Corporation STAGE-4 ROKKER XXR Custom
Summary of Contents for J&M Corporation STAGE-4 ROKKER XXR Custom
- Page 1 STAGE-4 ROKKER XXR Custom ® 330w 2-Speaker/Amplifier Install Kit for 2015-2018 Harley RoadGlide/ ® RoadGlide Ultra XXRK-330SP2-15RG-ST4 Installation Instructions...
- Page 2 Remove mum long-term durability. This STAGE-4 ROKKER XXR custom installation KIT has been engi- neered to be 100% plug-and-play for your convenience during the installation and to maintain the complete integrity of your Harley’s internal wiring harness.
- Page 3 stud on the frame that the negative battery cable is connected to. Fig. A (Fig. A) Then reconnect the negative battery cable to the battery. (Figure A) Do not connect the negative (black) lead from the amplifier to the negative post of the battery. Disconnect all plugs from the rear of the radio and then remove the radio itself by removing four mounting bolts.
-
Page 4: Specifications
Fig. C Fig. D Power Harness Radio Speaker Speaker Amplifier Enclosure Enclosure Orange 2-Pin Remote Turn On Connector Specifications ROKKER® XXR 330w RMS Full Range Class D Amplifier S/NRatio Separation >88dB 71dB Output Power (RMS) @ 1% THD 1000Hz 14.4V Stereo @ 2ohms 2 x 165 watts RMS Continuous Input Sensitivity... -
Page 5: Warranty Registration Form
WARRANTY AND REPAIR INFORMATION TWO YEAR LIMITED WARRANTY In order to facilitate the servicing of this warranty, the Warranty Registration Form should be filled out and returned within 10 days of the date of purchase. However, return of the Warranty Registration Form is not a precondition of this warranty, and this Warranty will be observed by J&M CORPORATION whether or not the Warranty Registration Form is returned, on the condition that other satisfactory evidence of the date of the original purchase is provided to J&M CORPORATION.