Advertisement
Quick Links
Blue Steel CXT3000/CXT4000 CompletePBX:
Package Contents
Blue Steel CXT3000/CXT4000
(2U 19'' width unit)
Power cord
Support hardware for 19'' cabinet
Prerequisites
You need a computer equipped with an Internet browser. Firefox is recommended.
Step 1: Powering Up the Unit
1. For safety reasons, if the line wiring exits the building, it is essential to ground the unit.
Note: Not properly grounding this device will void your warranty!
a. Connect a grounding tab to the grounding screw on the rear panel.
b. Using 12-16 gauge wire, connect the grounding tab to a reliable ground.
Figure 1: Grounding Screw on
Blue Steel Rear Panel
2. Connect the unit to the LAN.
3. Connect the power cord to the device and turn on the power using the power button on the
front panel. The device startup process takes about 2 minutes. The startup time depends on the
number of telephony ports installed in your Blue Steel CXT3000/CXT4000 unit. You will see
the "Loading..." notification on the Liquid Crystal Display (LCD) panel. When the booting
process is near completion, "XORCOM" will appear on the LCD panel.
Step 2: Submit Warranty Activation Request
At this point activate the product warranty (a pre-requisite for submitting any request for
technical support). Go to https://xorcom.com/xorcom-product-warranty, complete and submit the
form found there.
Step 3: Configure or Obtain the IP Settings for Blue Steel
CXT3000/CXT4000
It is possible to configure or obtain the IP settings by using either the LCD panel or a keyboard
and a display monitor.
PM0622.07 – Blue Steel CXT3000/CXT4000 CompletePBX Getting Started Guide (electronic version)
Getting Started Guide
IPMI
Eth1
Power Supplies
Misgav Industrial Park, POB 60, D.N. Misgav 20174, Israel
Tel: +972-4-9951999; Fax: +972-4-9990287
CompletePBX software preinstalled on
the hardware
4 x Astribank power cables
Key for hard disk drive bays
Eth0
Power for up to
four Astribanks
Grounding
Page 1 of 6
Advertisement
Related Manuals for Xorcom Blue Steel CXT3000
Summary of Contents for Xorcom Blue Steel CXT3000
-
Page 1: Package Contents
The device startup process takes about 2 minutes. The startup time depends on the number of telephony ports installed in your Blue Steel CXT3000/CXT4000 unit. You will see the “Loading...” notification on the Liquid Crystal Display (LCD) panel. When the booting process is near completion, “XORCOM”... - Page 2 How to obtain IP address(es) received from DHCP server The Blue Steel CXT3000/CXT4000 will try to obtain the IP address from your DHCP server, if one is available. To check the received IP address by using the LCD panel: Press the “Menu”...
- Page 3 3001. In order to configure the device follow these steps: a) From a computer’s Internet browser enter the Blue Steel CXT3000/CXT4000 IP address (for example http://192.168.0.64). b) You will be prompted to define a password for “administrator”. Once you define a password...
- Page 4 Detection dialogs to modify the internal firewall and intrusion detection settings. Unit Status LED (Light Emitting Diode) Indicators The Blue Steel CXT3000/CXT4000 is equipped with varying LED indicators on the front panel. Digital Blue Steel CXT3000/CXT4000 Models These are models that have at least one digital PSTN port – ISDN BRI or PRI. They have a vertical array of four status indicators on the left side of the front panel (Fig 2).
- Page 5 2. The Phone indicator is replaced with H/W LED, indicating hardware failure (when on). Port Status LED (Light Emitting Diode) Indicators The Blue Steel CXT3000/CXT4000 has a single green LED status indicator for analog ports (Fig. 4). The Red LEDs are NOT USED for line status indication), and there are two LED indicators for digital ports.
- Page 6 Misgav Industrial Park, POB 60, D.N. Misgav 20174, Israel Tel: +972-4-9951999; Fax: +972-4-9990287 internal flash..." message appears on the LCD. 4. The Xorcom Rapid Recovery menu will be displayed on the monitor. Additional LCD Panel Functions Status • System Info o IP Address (shows all configured IP addresses) o Hardware Status (CPU utilization, temperature, etc.