Advertisement
Wireless Repeater
Installation Guide
Product Description
The Emerson Wireless Repeater (P/Ns 814-3560 and 814-3570) is the recommended repeater to be used with the Wireless
Module System. If a Wireless Module is placed more than 100 feet from the Wireless Gateway, a Wireless Repeater should be
added to optimize the wireless range between devices. The Repeater should be placed between the Gateway and the Module.
The best location is a clear line-of-sight between the two units if possible.
Specifications
Power Supply
P/N 814-3560
9V to 30VAC,
12 to 40VDC
P/N 814-3570
120V to 277VAC,
50/60 Hz
Wireless Frequency
Dimensions
Temperature Range
Relative Humidity
Mounting and Wiring
•
Install outside a standard electrical box.
•
Clear line-of-sight between Wireless Gateway and Wireless Module and/or 3rd party wireless
transmitters.
•
Use the included double-sided adhesive pad to mount the Repeater once configured.
Document Part # 026-4842 Rev 1
©2017 Emerson Climate Technologies Retail Solutions, Inc. This document may be photocopied for personal use.
Visit our website at http://www.emersonclimate.com/ for the latest technical documentation and updates.
Weight
1.9oz (54g)
3.9oz (90g)
902MHz
2.57" H x 1.65" W x 1.10" D
(6.5cm x 4.2cm x 2.8cm)
Indoor use only
32°F to 104°F (0°C to 44°C)
20% to 95% non-condensing
Page 1 of 4
Advertisement
Table of Contents
Related Manuals for Emerson 814-3560
Summary of Contents for Emerson 814-3560
- Page 1 Product Description The Emerson Wireless Repeater (P/Ns 814-3560 and 814-3570) is the recommended repeater to be used with the Wireless Module System. If a Wireless Module is placed more than 100 feet from the Wireless Gateway, a Wireless Repeater should be added to optimize the wireless range between devices.
- Page 2 1. Access the Advanced Setup menu by holding down both buttons for five (5) seconds until both LEDs turn amber. Document Part # 026-4842 Rev 1 Page 2 of 4 ©2017 Emerson Climate Technologies Retail Solutions, Inc. This document may be photocopied for personal use. Visit our website at http://www.emersonclimate.com/ for the latest technical documentation and updates.
- Page 3 (2) seconds and both LEDs will blink green to confirm. Link a 3rd Party Transmitter to a Repeater Note: If an Emerson Module or Sensor is being used, the Repeater automatically links to the device and repeats the transmission once it is powered up and configured.
- Page 4 The contents of this publication are presented for informational purposes only and they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. Emerson Climate Technologies Retail Solutions, Inc. and/or its affiliates (collectively “Emerson”), reserves the right to modify the designs or specifications of such products at any time without notice. Emerson does not assume responsibility for the selection, use or maintenance of any product.
Need help?
Do you have a question about the 814-3560 and is the answer not in the manual?
Questions and answers