Advertisement
Quick Links
QUICK INSTALLATION GUIDE
DT-C8814
1
Installation Notice
‰ Package Contents
Camera ................. 1
Plug ....................... 1
Ethernet Cable ..... 1
‰ Security Warning
The original password of DT-C8816, DT-C8815, DT-C8814 is 123.
DT-C8819 device password is empty, please create a new password con-
tains 6 to 30 characters including alphabetic and number.
Please change the password of your camera regularly, and use the
combination of numbers, letters and special characters. Please keep the
username and password of your camera safe and secret.
2
Download APP
To install the APP "Yoosee" on your smart phone, there are two ways:
Scan the QR code
Download the "Yoosee" APP by scaning the QR code as below:
DT-C8815
Bracket .................1
Manual ................1
DT-C8816
Power Cable ...........1
Screw .....................2
DT-C8819
Advertisement
Summary of Contents for Daytech DT-C8814
- Page 1 Screw .....2 Ethernet Cable ..1 ‰ Security Warning The original password of DT-C8816, DT-C8815, DT-C8814 is 123. DT-C8819 device password is empty, please create a new password con- tains 6 to 30 characters including alphabetic and number. Please change the password of your camera regularly, and use the combination of numbers, letters and special characters.
-
Page 2: Add Ip Camera
Download from APP store the wifi that your phone is using → click OK → input wifi pass- Search “Yoosee” directly on the APP Store or Google Play, then install it. word → connection succeed (a Tick icon appear before the wifi name) →... - Page 3 3.2 Wireless Connection (Smartlink) NOTE: y Do not connect the camera with router via Ethernet cable. 3.2.1 Make sure your smart phone is connected to your wireless router. (Support 2.4G, Not support 5G.) 3.2.2 Run the Yoosee APP on your smart phone, connect the camera with power adapter, and wait for a moment, until the camera plays a sound “di-di-di”...
-
Page 4: Important Notice
Motion Detection Alarm: Click setting → Alarm Setting → turn on “Receive Important Notice alarm message” → “Motion Detection” → “Buzzer”. At the same time, click to arm the icon as the photos below. Setting username and password for camera to keep secure, if you forget the password, please reset camera, Then the username and password will set back to factory default. - Page 5 ‰ Add New Device Click the mark “+” on the left side, enter into to add new device, and input camera ID and Password. ‰ Device Monitoring Open CMS Client, click device name → start monitoring, as below pho- ‰ Recording Settings Record: click the button to start/stop recording, the video will save in AV format in computer hard disk.