Advertisement
Quick Links
8
Touchscreen Terminal. Rev 1.03 November 2009
Backplate Installation Template
24 mm
LCD Display
24 mm
= Mounting hole locations
Due to on-going development this manual is subject to change without notice.
© 2007 - 2009. Inner Range Pty. Ltd.
48 mm
24 mm
Position of
Cable entry cutout
24 mm
48 mm
Touchscreen Terminals provide an intuitive, user friendly touchscreen interface with
colour backlit display and plain english prompts for operations such as:
-Arming/disarming the system and isolating/de-isolating zones.
-Viewing and acknowledging alarms.
-Viewing area and system status, event messages and the historical event log.
-Building/home automation control and timing operations.
The unit has an elegant, slimline housing available in charcoal or ivory and a
customisable architectural face plate. Installation is simplified with screw terminals
for LAN wiring while the tamper switch is integrated into the PCB and housing
design. The module number is preset to 01 at the factory, but can easily be altered
from the Touchscreen if multiple units are connected to the same Control Module.
No physical Auxiliaries are available, but 32 Auxes are provided for Beeper/Backlight
control & logic operations. X04=Pulse beep / X05=Cont. beep / X06=Backlight on.
Programming options allow the installer to define appropriate settings for each
Touchscreen used in the system. e.g. The Areas and Diary messages to be displayed,
operations allowed, and which of those operations require the user to 'log in' with a
PIN code. This allows each Touchscreen to provide access to relevant functionality.
Three default display layouts are currently available, each with 2 or more screens in
addition to the main menu screen. See page 7 for details.
Insight V4.1 or later; or WDirect software V6.0 or later can be used to tailor the
screen layouts to system requirements. Layouts can be edited and/or added via the
Layout Editor accessible from the Touchscreen Terminal programming window.
Compatability:
Control Module F'ware: Must be V6.0 (or V5.8Beta) or later.
Insight Software:
WDirect Software:
Part No: 635022
Concept 4000
Touchscreen Terminal
995022 (Ivory) / 995022CH (Charcoal)
Must be V3.2 or later. V4.1 or later if Edit layouts required
Must be V6 or later.
1
Installation Manual.
Advertisement
Summary of Contents for IDE Concept 4000
- Page 1 Touchscreen Terminal. Rev 1.03 November 2009 Installation Manual. Concept 4000 Backplate Installation Template Touchscreen Terminal 48 mm 995022 (Ivory) / 995022CH (Charcoal) 24 mm 24 mm Touchscreen Terminals provide an intuitive, user friendly touchscreen interface with colour backlit display and plain english prompts for operations such as: -Arming/disarming the system and isolating/de-isolating zones.
- Page 2 Touchscreen Terminal. Rev 1.03 November 2009 Installation Manual. Installing the Touchscreen Terminal Touchscreen Terminal Parts List Choose an appropriate mounting location where the Touchscreen Terminal can Touchscreen Terminal assembly with protective film on LCD display. be installed on a flat, solid, vertical surface. Installation manual and mounting template.
- Page 3 Touchscreen Terminal. Rev 1.03 November 2009 Installation Manual. Commissioning. LAN Wiring NOTE: The number of Touchscreen Terminals that can be connected to a Control Connect the LAN using twisted pair communications cable. Module is detemined by the Memory configuration as shown in the following table. Connect LAN A &...
- Page 4 Touchscreen Terminal. Rev 1.03 November 2009 Installation Manual. Layouts and Options. Connections & Link Options. Three default Touchscreen Terminal layouts are provided as described on page 7. Layouts can only be modified and/or created with Insight V4.1 or later; or WDirect software V6 or later.