Signet 515/2536 Rotor-X Flow Sensors
*3-0515.090*
3-0515.090 Rev. W 07/16
515 Sensor
8510 Integral
(with red cap)
Sensor
2536 Sensor
8512 Integral
(with blue cap)
Sensor
2536 Sensor
(with grey cap)
•
English
•
Deutsch
•
Français
•
Español
Description
Operating Instructions for all versions of 515/8510 and 2536/8512
Simple to install with time-honored reliable performance, Signet 515 and 2536 Rotor-X
Paddlewheel Flow Sensors are highly repeatable, rugged sensors that offer exceptional
value with little or no maintenance.
Signet 515 and 2536 sensors measure liquid fl ow rates in full pipes and can be used in
low pressure systems.
•
The many material choices including PP, PVDF, and PVC (2536 only) make this
model highly versatile and chemically compatible with many liquid process solutions.
•
Sensors can be installed in DN15 to DN900 (½ to 36 in.) using Signet's
comprehensive line of custom fi ttings, except the PVC 2536 version which can be
installed in DN15 to DN100 (½ to 4 in) pipes using Signet's comprehensive line of
custom fi ttings as well.
•
These custom fi ttings, which include tees, saddles, and weldolets, seat the sensor to
the proper insertion depth into the process fl ow.
•
The sensors are also offered in confi gurations for wet-tap installation requirements
except 2536 PVC version.
515/8510 Advantages:
•
Flow rate range 0.3 to 6 m/s (1 to 20 ft/s)
•
Installs into pipe sizes DN15 to DN900 (½ to 36 in.)
•
Wide Turndown Ratio of 20:1
•
Sinusoidal frequency output capable of driving a self-powered fl owmeter (Model 5090)
•
Self-powered
•
Highly repeatable output
•
Chemically resistant materials
•
Easy to replace rotor
2536/8512 Advantages:
•
Flow rate range 0.1 to 6 m/s (0.3 to 20 ft/s)
•
Installs into pipe sizes DN15 to DN900 (½ to 36 in.)
•
The 2536 PVC version installs into pipe sizes DN15 to DN100 (½ to 4 in) for
concentrated Sodium Hypochlorite 12.5% applications
•
Wide Turndown Ratio of 66:1
•
Open-collector output
•
High resolution and noise immunity
•
Chemically resistant materials
•
Easy to replace rotor
•
Sodium Hypochlorite transfer/injection/batching (3-2536-U0)
Operating Instructions