Related Manuals for Tecnomac T 93 E H2
Summary of Contents for Tecnomac T 93 E H2
- Page 1 S T E A M H U M I D I F I E R S T 93 E H2 T 97 E H3 OUR SYSTEMS CONFORM TO EC STANDARD 73/23 CEE - 89/336 INSTRUCTION MANUAL Cod. 71503070/0 - 12/97...
- Page 2 MACHINE USER IS SVERELY PROHIBITED FROM CARRYING OUT THE OPERATIONS MARKED WITH THIS SYMBOL 1. ELECTRICAL CONNECTIONS 2. WATER MAINS CONNECTIONS 3. MACHINE INSTALLATION 4. MACHINE TEST RUN 5. REPAIRING MACHINE COMPONENTS AND PARTS 6. DISASSEMBLY OF MACHINE AND/OR COMPONENTS 7.
- Page 3 Any steam requirement is controlled by the electronic controller (R). It energises thecon- tactor to supply power to the immersed elec- TECHNICAL CHARACTERISTICS T 93 e H2 T97 e H3 trodes. Steam production is indicated on the control display and the absorbed energy is Production Kg./h...
-
Page 4: Start-Up Procedures
For fur ther infor mation please contact Tecnomac Service. FEEDING PIPE The feeding water will be conveyed from the T 93 E H2 - T 97 E H3 water-gate valve and pipework (min.) 6 mm. FEEDING PIPE internal diameter. Please Note that pressure ranges between 1 Min. -
Page 5: Periodic Maintenance
THE USER MUST NOT INTERVENE SHOULD ANY OF THE FOLLOWING MACHINE MAL- FUNCTIONS OCCUR. IT IS OBLIGATORY TO CONTACT AN AUTHORIZED TECNOMAC TECHNICIAN. 1. THE CONTROL PANEL IS NOT WORKING 2. THE HEATING SYSTEM IS NOT WORKING 3. - Page 6 main electrodes; – Remove any possible salt deposits under a – Remove the plugs from the high level elec- jet of water; trodes; – Check the conditions of the flow sensor with- – Remove the fixing bracket to free the cylin- in the fill solenoid valve: don’t use com- der;...