You’ll be amazed what noises a speaker (and your car) can produce when one touches the other. No. 7: Don’t skimp on the quality of the speaker wiring. All Audiovox speak- ers include wiring rated to properly transmit the normal power load the speaker is designed for.
INSTALLATION INSTRUCTIONS CAUTION: Do not mount the speakers in the following locations: - Where the door window glass comes in contact with the speaker. - Where the speaker comes in contact with the window crank handles or gear assemblies when rotated. - Where the speakers come in contact with the trunk springs, shock towers, or trunk lid.
bottom of the opening and check that the speaker matches the shape of the existing cut-out. Also check that the four speaker mounting holes align with the four existing holes in the steel sub- liner. Cutting Speaker Opening Prepare the speaker opening as follows: NOTE: This procedure can also be used for any flat panel install (Wagons, Vans, etc.) that have sufficient space behind the panel for recessing the speaker.
Page 6
Speaker Mounting Details The following illustrations define the requirements for mounting the speaker on the near and far sides of the mounting surface or inde- pendent mounting board. Typical Speaker Mounting and Grille Installation...
Page 7
AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with new or reconditioned product (at the Company's option) without charge for parts and repair labor.