Philips CD245 Quick Start Manual

Telephone
Welcome

Quick start guide

1
2
3
What's in the box
CD240
CD245
Handset
Connect
Install
2 AAA rechargeable
batteries
Enjoy
User manual
*You may find in the box the line adaptor delivered separately from the line cable. In this
case, you have to connect the line adaptor to the line cord first before plugging the line
cord to the line socket.
In multihandset packs, you will find one or more additional handsets, chargers with power
supply units and additional rechargeable batteries.
WARNING
Always use the cables and batteries that came with your phone.
Base station for CD240
OR
Battery door
CD245
Power supply Line cord*
Guarantee Quick Start Guide
1 Connect
Connect the base station
1. Place the base station in a central location near the telephone line socket and electricity socket.
2. Connect the line cord and the power cable to their corresponding connectors at the
back of the base station.
3. Connect the other end of the line cord and power cable to their respective sockets.
2 Install
Insert rechargeable batteries and charge
Insert batteries Charge handset for 24 hours
Configure your phone (if necessary)
After charging your phone for a few minutes, a Welcome screen may appear depending on
the country where you live. If the Welcome screen appears:
m
1. Press to display a list of countries.
:
2. Scroll to find your country.
m
OK
3. Press to confirm your selection.
Set date and time
m :
1. Press in idle mode, scroll to CLOCK/ALARM
m
OK to enter DATE & TIME .
2. The last stored date is displayed. Enter the current date (DD/MM) and press
3. The last stored time is displayed. Enter the current time (HH:MM) and press
A validation tone is emitted and your phone is now ready for use.
m
and press OK , press
m
OK .
m
OK
to confirm.