Computer Function - Ultrasport F-BIKE 200B User Manual

COMPUTER FUNCTION

SPECIFICATIONS
TIME 0:00~99:59
SPEED 0.0~999.9ML/H (KM/H)
DISTANCE 0.0~999.9ML (KM)
KEY FUNCTIONS
MODE : This key lets you to select and lock on to a particular function you want.
FUNCTIONS
TIME : Press the MODE key until pointer lock in to TIME. The total working time will be shown
when starting exercise.
SPEED : Press the MODE key until pointer lock on to SPEED Display current speed during
working time .
DISTANCE : Press the MODE key until pointer lock on to DISTANCE . The distance of each workout
will be displayed when starting exercise.
CALORIE : Press the MODE key until pointer lock on to CALORIE The calorie burned will be
displayed when starting exercise.
ODOMETER : Automatically accumulates workout distance when starting exercise.
SCAN : Display changes according to the next diagram every 4 seconds.
SCAN → TIME → SPEED → DISTANCE → ODOMETER → CALORIE
NOTE
1. Without any signal coming in 4-5 minutes, the LCD display will be shut off automatically.
2. When there is signal input, the monitor automatically turns on.
3. If there is a possibility to see an improper display on the monitor, please replace the batteries to have
good result .You must be to replace the batteries at the same time.
4. Please according to the battery compartment labeled with battery. (Note: When installed in a battery
at the same time, please don't press the button switch.)
GB
SCAN PULSE
TIME CAL SPEED DIST ODO
MIN CALORIE 0.0~999.9KCAL
ODOMETER 0~9999ML (KM)
22
www.ultrasport.net