Pfaff 2170 User Manual
Sewing machine accessories
Hide thumbs
Also See for 2170:
- Owner's manual (179 pages) ,
- Maintenance manual (12 pages) ,
- Manual (29 pages)
Advertisement
Quick Links
Endless Embroidered Pillow
Supplies:
• PFAFF creative 2170 with embroidery unit.
• PFAFF Endless Hoop
• PFAFF Embroidery Design Collection # 383 Endless Needlework
• Schmetz #100 top stitch needle
• SULKY TEAR AWAY Stabilizer
• Mettler poly sheen multi thread
• PFAFF 1/4" Right Guide Foot
• PFAFF Decorative Trim Foot
• Piping Hot Binding Tool
• PFAFF Piping Foot
• PFAFF Open-Toe Appliqué Foot
• "More sew-it-yourself Home Décor" By Chris Jeffreys
• Sewing Thread
• Fabric Marking Pen
• Decorative Trim
• Bag's & Tote's Metal Zipper 8 – 12"
• Two Contrasting Fat Quarters
• L'Orna Decorative Touch Wand and Hot Fix Embellishments
Set Up:
•
Choose one fabric for the embroidered center panel and hoop four inches down
from the top. Be sure to line up one of the 18" sides with the guide on the right
side of the hoop.
•
Select design # 10.
•
Using the Mettler poly sheen multi thread and following the directions for
continuous embroidery, embroider the design twice.
•
Trim embroidered panel to 6 ½" x 15 ¼", centering the design.
•
Cut two border strips out of the contrasting fabric 2 ¼" x 15 ¼".
•
Cut a backing piece of fabric of your choice 8" x 15 ¼".
Construction:
1. Using the ¼" Right Guide foot and general sewing thread, stitch the border
pieces to the top and bottom of the embroidered panel.
2. Press both seams to the darker fabric.
3. Switch to the Decorative Trim Foot.
4. Stitch decorative ribbon either just inside or on top of both border seams.
For this you can use a decorative thread or a thread that matches the
Advertisement
Related Manuals for Pfaff 2170
Summary of Contents for Pfaff 2170
- Page 1 Endless Embroidered Pillow Supplies: • PFAFF creative 2170 with embroidery unit. • PFAFF Endless Hoop • PFAFF Embroidery Design Collection # 383 Endless Needlework • Schmetz #100 top stitch needle • SULKY TEAR AWAY Stabilizer • Mettler poly sheen multi thread •...
- Page 2 11. Using the L’orna Decorative Touch Wand, embellish your pillow with crystals, create a fringed tassel and attach it to the zipper. Supplies: • PFAFF 6mm Beading Foot • Decorative Thread Construction: 1. Find a piece of cardboard or anything sturdy that is approximately twice the height you would like the finished tassel to be (Suggestion: an empty fabric bolt).
- Page 3 5. Attach the 6mm Beading foot to your sewing machine. 6. Select zig–zag stitch #3, width = 3.5 - 4 and length = 0.8. Place the machine in free motion position with the feed dogs down.
- Page 4 12. Clip the non corded loop at the end with the loose threads. Finally, trim all thread ends to the same length and your Fringed Tassel is complete. Please note these directions were made using a rayon decorative thread. If you are using cotton thread, you will probably not need to wrap as many times as the cotton thread is much thicker.