Download Print this page

Lottworx LW1-06S Installation Instructions & Owner's Manual

Led light bar

Advertisement

Quick Links

Installation Instructions & Owners Manual
LED Light Bar Model Numbers:
LW1-06S, LW1-12S, LW1-18S, LW1-24S,
LW1-31S, LW1-37S, LW1-43S, LW1-50S
Proudly engineered, designed, tested and
assembled in the United States of America.
LOTTworx
Las Vegas, NV. 89115 U.S.A
www.lottworx.com
READ NOW AND SAVE THIS
DOCUMENTATION FOR FUTURE REFERENCE
REV 3.6A
No portion of this manual, including artwork, may be reproduced
without written consent from LOTTworx. Actual product may slightly
differ from the product described herein due to continuing
improvements to product and production processes. LOTTworx and/or
any associates are not responsible in any capacity or form for any
damage or loss caused by the installation or use of the products
 Copyright 2015 LOTTworx
described herein.
WARNING
Read, understand, and follow all contents
of this manual before and during
installation and operation this product.
Failure to do so may result in damage to
property, product and/or personal injury.
Table of Contents
Product Warnings - - - - - - - - - - - - - - - - - - - - - - - - 1
Installation Instructions - - - - - - - - - - - - - - - - - - - 2
Product Features, Details, & Specifications - - - - - 8
Product Maintenance - - - - - - - - - - - - - - - - - - - - 9
Troubleshooting - - - - - - - - - - - - - - - - - - - - - - - - 11
Product Warnings
•Never look directly into the light produced by this product, serious
eye injury can occur.
•Never intentionally direct the light produced by this product at
other living humans or animals, serious eye injury can occur.
•This product is intended as a secondary source of illumination,
never use as a primary source of illumination especially during
navigation.
•This product is NOT Department of Transportation (D.O.T)
approved, NEVER operate this product on public roadways.
•Installation of this product requires connection of electrical wires
and should only be performed by trained personnel.
•Verify electrical voltage has been removed from all wires involved
in the installation of this product prior to installation.
•Remove negative terminal from all batteries of vehicle during
installation of this product.
•Never apply power to this product other than 6-38 Volts of
Direct Current (VDC) electrical power.
•DO NOT CONNECT THIS PRODUCT TO HOUSEHOLD ALTERNATING
CURRENT (AC) ELECTRICAL POWER, SERIOUS INJURY AND DAMAGE
MAY OCCUR.
•Prior to operation, verify all electrical wires and connections
upstream of this product are capable of supporting the amperage
requirements placed on them during operation of this product.
 Copyright 2015 LOTTworx
1

Advertisement

loading

Summary of Contents for Lottworx LW1-06S

  • Page 1 Read, understand, and follow all contents No portion of this manual, including artwork, may be reproduced of this manual before and during without written consent from LOTTworx. Actual product may slightly differ from the product described herein due to continuing installation and operation this product.
  • Page 2: Installation Instructions

    •After mounting brackets are installed onto housing end cap studs, snug housing end cap and mounting bracket. down the stainless steel end cap stud lock nut and maneuver light onto final mounting surface.  Copyright 2015 LOTTworx  Copyright 2015 LOTTworx...
  • Page 3: Electrical Installation

    Figure 1.4: Example of Figure 1.5: Example of assembled •Remove negative terminal from all batteries of vehicle during installation of assembled mounting mounting brackets.(Outward this product. brackets.(Inward Position) Position)  Copyright 2015 LOTTworx  Copyright 2015 LOTTworx...
  • Page 4 Figure 2.2: Electrical diagram utilizing toggle switch and fuse only. Figure 2.3: Electrical diagram utilizing toggle switch and fuse only. Figure 2.1: Electrical diagram utilizing automotive relay.  Copyright 2015 LOTTworx  Copyright 2015 LOTTworx...
  • Page 5: Product Description

    The figure above displays the location of the main external features of each LW1-18S 3492 6-38 VDC 5.390 A 2.580 A LOTTworx LW1 series light. The other main features of this product series LW1-24S 4656 6-38 VDC 7.416 A 3.500 A...
  • Page 6: Troubleshooting

    If any other problems or questions are encountered please contact •It may periodically be desired to change the alignment of the light LOTTworx Technical Support at lottworx.custserv@gmail.com emission. To make an axial adjustment, turn the mounting nuts secured to the end cap stud in a counter clockwise direction to loosen. Make ...

This manual is also suitable for:

Lw1-12sLw1-18sLw1-31sLw1-24sLw1-37sLw1-43s ... Show all