Hyundai Grand i10 Owner's Manual page 42

Safety system of your vehicle
Installing a child restraint system with a
lap/shoulder belt
To install a child restraint system on the
rear seats, do the following:
1. Place the child restraint system on a
rear seat and route the lap/shoulder
belt around or through the restraint, fol-
lowing the restraint manufacturer's
instructions.
Be sure the seat belt webbing is not
twisted.
3 26
E2MS103005
2. Fasten the lap/shoulder belt latch into
the buckle. Listen for the distinct "click"
sound.
✽ NOTICE
Position the release button so that it is
easy to access in case of an emergency.
OEN036101
3. Remove as much slack from the belt
as possible by pushing down on the
child restraint system while feeding the
shoulder belt back into the retractor.
4. Push and pull on the child restraint
system to confirm that the seat belt is
holding it firmly in place.
To remove the child restraint system,
press the release button on the buckle
and then pull the lap/shoulder belt out of
the restraint and allow the seat belt to
retract fully.
OEN036104