Advertisement
Quick Links
Camera PTZ
PAL/NTSC Alu/SSt
Installation Manual
Manual No. IM0973142, R1-4
Article no. 0506911, 0516911
0506952, 0516951
0506961, 0516961
09/2014
English
Article no. 0506911; Camera PTZ PAL Sst
0516911; Camera PTZ PAL Sst RS485
Article no. 0506952; Camera PTZ PAL Alu
0516951; Camera PTZ PAL Alu RS485
0506961; Camera PTZ NTSC Alu
0516961; Camera PTZ NTSC Alu RS485
Advertisement
Related Manuals for Orlaco 0506911
Summary of Contents for Orlaco 0506911
- Page 1 Article no. 0506911, 0516911 0506952, 0516951 0506961, 0516961 09/2014 English Article no. 0506911; Camera PTZ PAL Sst 0516911; Camera PTZ PAL Sst RS485 Article no. 0506952; Camera PTZ PAL Alu 0516951; Camera PTZ PAL Alu RS485 0506961; Camera PTZ NTSC Alu...
- Page 2 • If there have been alterations or changes to this equipment that have dead end of rope not been specifically approved by Orlaco, use of this equipment is not First demount two coverplates of the PTZ unit, see figure 3.
- Page 3 N.C. Fuse of the vehicle’s supply voltage is defective. Replace the fuse. 4 = Brown N.C. Other cause. Contact your Orlaco dealer. R = 50,0 5 = Shield N.C. ∅12 (4x) Monitor is not or incorrectly connected to the Check the connection of the Monitor 2.
- Page 4 Do not remove the blue seal. See figure 9. The warranty expires when the blue seal is broken! The warranty expires when the user does not act according the instructions and warnings in this manual. 9. Product specifications Base Camera 0506911 Base plate Camera 0516911 RS485 Camera NTSC 0506961 Camera...
- Page 5 The pan/tilt will have the same address as the camera that is mounted on it. This address is assigned automatically but the pan/tilt must be <0x80 + address> <V_COMMAND> <V_CATEGORY_CAMERA1> <V_PAN_TILT_ANGLE> <PA3> <PA2> <PA1> <TA3> <TA2> <TA1> <V_TERMINATOR> connected before the camera in the serial communications string (this is automatically correct when standard Orlaco cabling is used). Pan/tilt/camera preset recall: 13.2.
- Page 6 V_FOCUS_FAR 0x23 or made public in printed form, in photocopy form or on microfilm, or in V_FOCUS_NEAR 0x33 any other way, without the prior written permission of Orlaco. This also V_FOCUS_STOP 0x00 applies to the associated drawings and figures. V_AUTOFOCUS...
- Page 7 ORLACO Orlaco is a Manufacturing company that specializes in making cameras and monitor systems for commercial vehicles, fork-lift trucks, cranes, off shore and maritime. Our objective is to design and produce camera systems for the profes- sional market that improve the drivers view and increase operating efficiency.